Specification
Input Voltage: DC12V-13.8V
Output voltage: 14.5V
Max output current: 4A
Cable length: 6M
Product wreight: 325g
Insert the big plug with LED indicator into 12-volt power outlets of a car with good
battery, Insert the small cigarette lighter plug into 12-volt power outlets of a car with poor battery,
the charger begin charge the poor car battery with red LED indicator lights up
Green LED indicator will light up when the poor battery was charged up to about
12.6V,then cut off connection, try to start the car. You could also try to start the car when
the voltage displayed above 11.5V even the green LED indicator doesn't light up.
Try it two or three times, if the car with poor battery could not be started after several
times, you should check for other reason.
This item is for emergency use, don't use it as a normal battery charger, every charging
period should be no more than 25 minutes.
Our Services
1. Reply your enquiry in 24 working hours
2. Experienced staffs answer all your questions in fluent English
3.Customized design is available .
4.Exclusive and unique solution can be provided to our customer by our well-trained and professional and staffs
5. Special discount and protection of sales area provided to our distributor
Since the foundation in 1995, our company has been dealing in the line of auto electric appliances and auto accessories for more than 10Â
years with customers worldwide and established close friendship and cooperation with them.
Our factory, located in Hangzhou, close to Shanghai, covers an area of more than 200,000 square feet while the building area is aboutÂ
140,000 square feet. We have 12 assembly lines in the factory and also an injection molding plant with 20 injection machines.Â
Our products are mainly in the line of auto accessories, such as Car Fan, Car Vacuum, Car Jump Start, Car Air pump, Car Air Compressor,Â
Car worklight and etc. For the good quality and pleasing design of our products, we have a ready market in both America and Europe, and
 have connections with some of the largest retail stores and distributors in the world. With the rapid development of our company these
 years, we sincerely want to cooperate with customers from all over the world on the basis of mutual benefits.
Why Choose Tonny
1.20 years experience in producing auto battery chargers.
2.Our products listed by CE,RoHS,CETL and other authority certifications
3.Experienced staff and worker assure superior product quality
4.Advanced quality management system
5.Strong technology research and development abilityÂ
Our working parter
1. We are supplier of Walmart and WALGERRNS ,LIDL ,CVS ,HOMEDEPOT ,ACADEMY ,MEIJER ,VDI ,LOME"S,
TARGET ,O2COOL ,SCOTTS .........
2. Expertise.  We are professional manufacturer with rich experience in manufacturing Car vehichle chargers smart phone chargers
and USB data cables.
3. Quality Assurance.  Professional product line. well-trained workers,strict QC standard and 10years focus on OEM ITEMS
4. Good Service.  Customer is the God,aim to provide the best service for you ,with a competitive and GOOD quality,and on thime
 delivery .12months warranty for all productsÂ
Specification
Input Voltage: DC12V-13.8V
Output voltage: 14.5V
Max output current: 4A
Cable length: 6M
Product wreight: 325g
Insert the big plug with LED indicator into 12-volt power outlets of a car with good
battery, Insert the small cigarette lighter plug into 12-volt power outlets of a car with poor battery,
the charger begin charge the poor car battery with red LED indicator lights up
Green LED indicator will light up when the poor battery was charged up to about
12.6V,then cut off connection, try to start the car. You could also try to start the car when
the voltage displayed above 11.5V even the green LED indicator doesn't light up.
Try it two or three times, if the car with poor battery could not be started after several
times, you should check for other reason.
This item is for emergency use, don't use it as a normal battery charger, every charging
period should be no more than 25 minutes.
Our Services
1. Reply your enquiry in 24 working hours
2. Experienced staffs answer all your questions in fluent English
3.Customized design is available .
4.Exclusive and unique solution can be provided to our customer by our well-trained and professional and staffs
5. Special discount and protection of sales area provided to our distributor
Since the foundation in 1995, our company has been dealing in the line of auto electric appliances and auto accessories for more than 10Â
years with customers worldwide and established close friendship and cooperation with them.
Our factory, located in Hangzhou, close to Shanghai, covers an area of more than 200,000 square feet while the building area is aboutÂ
140,000 square feet. We have 12 assembly lines in the factory and also an injection molding plant with 20 injection machines.Â
Our products are mainly in the line of auto accessories, such as Car Fan, Car Vacuum, Car Jump Start, Car Air pump, Car Air Compressor,Â
Car worklight and etc. For the good quality and pleasing design of our products, we have a ready market in both America and Europe, and
 have connections with some of the largest retail stores and distributors in the world. With the rapid development of our company these
 years, we sincerely want to cooperate with customers from all over the world on the basis of mutual benefits.
Why Choose Tonny
1.20 years experience in producing auto battery chargers.
2.Our products listed by CE,RoHS,CETL and other authority certifications
3.Experienced staff and worker assure superior product quality
4.Advanced quality management system
5.Strong technology research and development abilityÂ
Our working parter
1. We are supplier of Walmart and WALGERRNS ,LIDL ,CVS ,HOMEDEPOT ,ACADEMY ,MEIJER ,VDI ,LOME"S,
TARGET ,O2COOL ,SCOTTS .........
2. Expertise.  We are professional manufacturer with rich experience in manufacturing Car vehichle chargers smart phone chargers
and USB data cables.
3. Quality Assurance.  Professional product line. well-trained workers,strict QC standard and 10years focus on OEM ITEMS
4. Good Service.  Customer is the God,aim to provide the best service for you ,with a competitive and GOOD quality,and on thime
 delivery .12months warranty for all productsÂ
Laser cutting machine with CCD camera is with a normal Laser Engraver Cutter add a CCD camera mounted on top of laser head, can scan the worktable to computer, recognize the label, pattern, image then cut according the outline. Laser cutting machine with camera system has many advantages such as high cutting precise, smooth cutting edges, dust free, fast processing speed, less waste and higher efficiency, can auto recognition of defect to avoid cut. It is widely used in cutting printed or woven label, logo, image, decorative border, etc.
Ccd Laser Cutting Machine can also use as other normal CO2 Laser Engraver Cutter for almost all nonmetal material like wood acrylic leather etc. After user install software, there will be two software installed, RDWork and RDVision. When user want to use camera, open the RDVision, when use not use camera just open RDWork.
Applicable materials:
Almost all nonmetal materials such as wood, MDF, acrylic, double color board, Plexiglas,common glass, bamboo, rubber, marble, granite and tiles, leather cloth etc.
Applicable industries:
Advertising industry, Billboards, artistic gifts, crystal ornaments, paper-cut, bamboo and wooden product, garment and leather, embroidery, decoration and upholster industry.
CCD Camera Laser Cutter Engraver
Ccd Camera Laser Cutter Engraver,Ccd Laser Cutting Machine,Laser Engraver Cutter,Ccd Laser Engraver Cutter
Jinan Transon Cnc Equipment Co., Ltd. , https://www.csjiguang.com