What is the difference between a cold pump and a hot pump
1, the use of temperature below 200 degrees Celsius cold oil pump, 200 degrees Celsius hot oil pump.
2, the general hot oil pump seal seal oil seal, and the cold pump will not note.
3, hot oil pump pump vertical segmented, while the pump used in the cold oil level open. Some hot oil pump to prevent movement of the center line of the pump structure.
4, hot pump mouth ring gap larger. Cold pump is smaller.
5, multi-purpose hot oil pump carbon steel, alloy steel, and cold oil pump can be cast iron.
6, hot oil pump needs to be preheated before starting, while the cold oil pump, the cold oil pump is unnecessary.
7, hot oil pump bearings, bearing boxes, packing boxes mechanical seals need water cooling, and cold pump can not be used.
8, the type of hot oil pump generally use the letter R said cold oil pump with the letter J table
This article Keywords: oil pump
Offset printing blanket is different from general rubber products, rubber cloth it is laden with the ink on the plate is passed on to the paper, in order to make the Printing Ink evenly, points clear, rich layers, offset printing rubber cloth must have moderate hardness, compressive deformation is small, good ink performance and low elongation, etc, in chemical properties on it should have already adsorption ink and adsorption effect of the education version fluid and to have not react with oil, and potions and by oil, liquid erosion performance.And because it is lithography, so the blanket flatness requirements are very high.
Blanket Cleaner,Printed Blanket,Offset Printing Blanket,Printer Rubber Blanket Material Printing
Shanghai Chenjie Printing Material Co., LTD , https://www.shrunbanye.com