1.lifting height:4-12m
2.Load capacity:300kg--500kg
3.Hydraulic system increase safety
4.Battery power
Specifications:
1.Can travel at slow speed and rapid speed self propelled.
2.Only one person is needed to lower, raise, forward, backward, steer the machine.It improves working efficiency and reduces man-power and labor intensity greatly
3.Maneuverable, extremely easy to use
4.Safe ground clearance for indoor/outdoor Operation
5.Robust, reliable and easy to maintain
6.Slope alarm, charger indicator
7.Pit protection system for max. Safety,Flexible turning unit
8.It is especially good for long time work at airport terminals, stations, docks, shopping markets, stadiums and work shops.
Control system
1. Manual control and electric control
2. There are two control systems(optional). One is hand button, which may be placed in any position on the table rail for the convenience of operation.
The other is fixed on the electric-control box, which is supported with emergency stop button for prevention of any accident.
Safety
1. In special circumstances, the explosion-proof electric equipment can be utilized.
2. The platform is equipped with antiskid plate to prevent slipping,
It is safe enough when workers operate on the platform
3. The lift has hydraulic overload protective organization to ensure that equipment will not work
When the load beyond its rated load capacity.
4. The scissor lift is equipped single control solenoid valves to prevent the platform dropping if power failure.
Model |
Lifting height(m) |
Working height(m) |
Rated capacity(kg) |
Platform size(mm) |
Weight(kg) |
SJYZ-4 |
4 |
6 |
320 |
2260*800 |
1800 |
SJYZ-6 |
6 |
8 |
320 |
2300*1150 |
2100 |
SJYZ-8 |
8 |
10 |
320 |
2300*1150 |
2300 |
SJYZ-10 |
10 |
12 |
320 |
2300*1150 |
2500 |
SJYZ-12 |
12 |
14 |
320 |
2300*1150 |
2950 |
Â
Brief Introduction & Working Principle --Centrifugal Sifter
The screen holder is placed inside the machine. Bulk materials mixed with airflow and atomization pass the Screw Conveyor device, enter the screen holder. The undersize materials are sprayed through the screen cloth and discharged from the outlet under the action of centrifugal force and the cyclone propelling power, which caused by the blade inside the net tube. The oversize material, which can not cross the screen cloth, is discharged from the rough material outlet along the inside surface of the tube.
Cantilevered design and twin screen holder design are available.
Features
*Very smart but large capacity for light materials(such as starch,flour,lime powder,etc.)
*Mesh size should not be higher than 325 mesh
*No oversize end bearings or seals Hinged oversize end door.
*Easy to remove screen and screen retainer Hygienic design sifting screen.
*The sifter can be stripped down for cleaning without the need for specialist assistance.
*Full sealing makes this machine dust proof.
*No transmitted vibration.
*Easy to inspect and/or clean No tools required for screen, paddle and screw removal.
*Sanitary design and fast disassembly without tools
Air Flow Sifter,Air Flow Screening Machine,Air Jet Sieve,Air Jet Sieving Machine
XINXIANG CHENWEI MACHINERY CO.,LTD , https://www.sieves.nl