Flange Nuts/Hex Flange Nut/Hexagon Nuts with Flange

Trademark: OEM
Specification: M1.0-M16(Nut-01)
Origin: Guangdong, China (Mainland)
Trademark: OEM
Specification: M1.0-M16(Nut-01)
Origin: Guangdong, China (Mainland)
Product Name: hardware Round Head Knurled Embedded Brass Nut(nut-01)
 A. Size: per drawing
B. Material: Brass etc
C. Finish: All kind
D. MOQ: 10000PCS
E. Sample lead time: 15days

Similar Products:(Per drawing)
Flange Nuts/Hex Flange Nut/Hexagon Nuts with Flange
Flange Nuts/Hex Flange Nut/Hexagon Nuts with Flange



  Machining basic parameters
1 Material copper, aluminum, iron, stainless steel, 45 #, POM and other environmental friendly materials
2 Specifications M1.0-M15, the maximum diameter of machining is 30MM, and the largest diameter of casting is 790MM.
3 Surface Treatment white zinc, yellow zinc nickel, copper, chromium, tin, gold, silver, etc.
4 Tolerance Outer diameter tolerance +/- 0.01mm;    Length tolerance +/- 0.01mm
Threads can be checked by go-and-not-go-gauge.
5 Processing Methods manufacture of blue drawing, sample and raw material

   Production equipment
Flange Nuts/Hex Flange Nut/Hexagon Nuts with Flange
 
 
Detection Device

Flange Nuts/Hex Flange Nut/Hexagon Nuts with Flange

Certificate
Flange Nuts/Hex Flange Nut/Hexagon Nuts with FlangeFlange Nuts/Hex Flange Nut/Hexagon Nuts with Flange



FAQ
1.Are you a manufacturer?
---Yes, we are. Warmly welcome to visit our factory at any time.
---
We can according to your usage and design the hardware for you. Also can according to you drawing.
---We can give you best design and save more cost for you.

2.How does the ADL control the quality?
---During processing, the operating machine worker inspect the each sizes by themselves.
---After finished the first whole part, will  show to QA for full inspection.
---Before shipment, the QA will inspect according to ISO sampling inspection standard for mass production.

---Inspection equipment: Hardness test, salt spray endurance test, mechanical sizes test, RoHS report,     certificate of material and etc as per your need.

3.What's the payment term?
---100% T/T in advance normally; 50% deposit, 50% balance by T/T before shipment when order amount over 5000USD.

4.What's the delivery time?
---Normal, 7-15 working days for sample. 12-30 working days for mass production.
--If any urgent parts, we can provide preferential processing and control the delivery time as you required.

5.What is the standard of package?
---
Inner is PP bag or separate Blister plastic box, keep no scratch and damage.out is carton. Then pallet. Carton size: 23*23*16, and pallet size is: 100*100*50, or as your requirement.

6.Can we get some sample?
---Sample can be provided, The clients will bear the shipping cost. The Sample cost is about 100-500 USD for each part, And it will be refund after order the mass production.
Product Name: hardware Round Head Knurled Embedded Brass Nut(nut-01)
 A. Size: per drawing
B. Material: Brass etc
C. Finish: All kind
D. MOQ: 10000PCS
E. Sample lead time: 15days

Similar Products:(Per drawing)
Flange Nuts/Hex Flange Nut/Hexagon Nuts with Flange
Flange Nuts/Hex Flange Nut/Hexagon Nuts with Flange



  Machining basic parameters
1 Material copper, aluminum, iron, stainless steel, 45 #, POM and other environmental friendly materials
2 Specifications M1.0-M15, the maximum diameter of machining is 30MM, and the largest diameter of casting is 790MM.
3 Surface Treatment white zinc, yellow zinc nickel, copper, chromium, tin, gold, silver, etc.
4 Tolerance Outer diameter tolerance +/- 0.01mm;    Length tolerance +/- 0.01mm
Threads can be checked by go-and-not-go-gauge.
5 Processing Methods manufacture of blue drawing, sample and raw material

   Production equipment
Flange Nuts/Hex Flange Nut/Hexagon Nuts with Flange
 
 
Detection Device

Flange Nuts/Hex Flange Nut/Hexagon Nuts with Flange

Certificate
Flange Nuts/Hex Flange Nut/Hexagon Nuts with FlangeFlange Nuts/Hex Flange Nut/Hexagon Nuts with Flange



FAQ
1.Are you a manufacturer?
---Yes, we are. Warmly welcome to visit our factory at any time.
---
We can according to your usage and design the hardware for you. Also can according to you drawing.
---We can give you best design and save more cost for you.

2.How does the ADL control the quality?
---During processing, the operating machine worker inspect the each sizes by themselves.
---After finished the first whole part, will  show to QA for full inspection.
---Before shipment, the QA will inspect according to ISO sampling inspection standard for mass production.

---Inspection equipment: Hardness test, salt spray endurance test, mechanical sizes test, RoHS report,     certificate of material and etc as per your need.

3.What's the payment term?
---100% T/T in advance normally; 50% deposit, 50% balance by T/T before shipment when order amount over 5000USD.

4.What's the delivery time?
---Normal, 7-15 working days for sample. 12-30 working days for mass production.
--If any urgent parts, we can provide preferential processing and control the delivery time as you required.

5.What is the standard of package?
---
Inner is PP bag or separate Blister plastic box, keep no scratch and damage.out is carton. Then pallet. Carton size: 23*23*16, and pallet size is: 100*100*50, or as your requirement.

6.Can we get some sample?
---Sample can be provided, The clients will bear the shipping cost. The Sample cost is about 100-500 USD for each part, And it will be refund after order the mass production.

Other Plastic Profile Extrusion Line

Plastic Machine,Plastic Profile Plant,Pe Profile Production Line

Hangzhou Polytech Plastic Machinery Co., Ltd. , http://www.china-wpcmachine.com

Posted on