Lean Tube Joint Hardware (h-2)

  • Model NO.: h-2
  • Processing Type: Metal Spinning
  • Mould: Multistep Progressive Dies
  • Process: Forming Process
  • Tolerances: 0.01mm
  • Trademark: xianghai
  • Specification: Thickness: 2.3mm
  • HS Code: 391740000
  • Type: Cold Stamping
  • Material: Stainless Steel
  • Fine Blanking: Multi-Position
  • Industry: Metal Stamping Parts
  • Customized: Customized
  • Transport Package: Wooden Box, Carton
  • Origin: Guangdong Dongguan
Basic Info
Model NO.: H-1
Thickness: 2.5mm
Application: PE Pipe, Lean Tube, ABS Pipe
Trademark: HLX
Origin: Guangdong, China
Type: Metal Joint

Model No: H-1
Surface Treatment: Painting, Chrome Plated
Specification: CE, ISO
HS Code: 391740000
Product Description
Specification

Model No Application
H-1 for two composite tubes into T-type structure
H-2 for three composite tubes into three-dimensional structure of 90 degrees
H-3 for four composite tubes into three-dimensional structure of 90 degrees
H-4  for four composite tubes in a cross structure
H-5 for five composite tubes into three-dimensional structure of 90 degrees
H-6 for two composite tubes into 90 different surface structure
H-7  two composite tubes used to have unilateral arbitrary angle structure, mainly to strengthen overall
H-8 for two composite pipe coupling can be fitted into the movable structure, mainly for the hinge structure
H-9 for two composite pipe composite pipe structure and the other is connected to. Main strengthen bearer and a side profile.
H-10 for two composite pipe coupling as to be rotatable relative to the T-shaped structure
H-11 for two pipe coupling in line, mainly used to strengthen the structure.
H-12 for three composite tubes have arbitrary angle into bilateral structure, mainly used to enhance the overall strength.
H-13 for strong coupling between the composite tube and the plate.
 

Roll forming machines are one of the most equipment applied in metal fabrication industry; however, metal sheet bending and cutting machine cannot be replaced for making some kinds of products.

Metal Sheet Bending Machine (known as metal sheet folding machine as well) and metal sheet cutting machine (named as metal sheet Shearing Machine also) are working under hydraulic power driving but controlled manually, mostly by foot control.

Hydraulic Bending Machine:bending angle:90degree,120degree,135degree.

  • Suitable Material: Aluminum, Galvanized sheet or Pre-painted steel;
  • Hydraulic Power: 3KW
  • Hydraulic Station Pressure: 10-12MPA
  • Controlling System: Hydraulic
  • Bending Angle: 1 molds for 8 angles/degrees in total
  • Min. Bending end: 5mm
  • Max Length: 4 meters or 6 meters
  • Material Thickness: 0.4mm-1.0mm
  • Working Speed: 0-8m/m
  • Voltage: 380V, 50HZ, 3 phase

Bending Machine

Bending Machine,3200 Hydraulic CNC,Sheet Bending Machine,Hydraulic Steel Plate Press

Botou Golden Integrity Roll Forming Machine Co.,Ltd , http://www.jcxsteelrollformer.com

Posted on