Power: 1.1 kw
Conveying Capacity: 250kg/h
Max-static wind Pressure: 1300mmAg
Material Hopper Volume: 6L
Conveying Tube Inner Φ : 38mm
Main Controller Dimension(HxWxD): 600x440x360mm
Main Controller N. W: 20kgs
Material Hopper N. W: 6kgs
Package size(LxWxH): 0.51x0.51x0.81 m
PL Series VACUUM AUTOLOADER meet the need of the transportation of various plastic. Every type of machine use the stainless steel and high-efficiency vacuum motor. And if is also equipped with the motor overload protective device and the automatic alarm when lacking materials. It is portable and perdurable. Its suction is very strong. The machine is easy to install and operate. In the industry, the machine has the high reputation and it is used widely. It is the essential equipment which can promote the modernization of the plastic moulding industry.
FEATURES
1. The mainframe and the material barrel use the separate design, it is safe and convenient.
2. The MICOM microcomputer control the running.
3. It has the independent filter. And it is easy to clean the dust.
4. It has to decrease the noise in the running.
5. It has the stainless steel storage barrel which is portable, perdurable and easy to clean,
6. Its control box is design separate and easy to mend.
7. It has the automatic buzzer alarm to warn the lack of the materials.
8. It has the motor overloading automatic protective device.
9. The filter has the switch of the automatic dust removal and the manual removal
| Vacuum Autoloader (PL series) | |||||
| Model | PL-800B | PL-800 | PL-900 | PL-300 | |
| Power (kw) | 0.75 | 1.1 | 2.2 | 1.1 | |
| Conveying Capacity (kg/h) | 300 | 350 | 450 | 250 | |
| Max-Static wind Pressure (mmAg) | 1500 | 2300 | 2700 | 1300 | |
| Meterial Hopper Volume (L) | 6 | 6 | 9 | 6 | |
| Conveying Tube Inner Φ (mm) | 38 | 38 | 38 | 38 | |
| Main Controller Dimensions (HxWxD) | 660x420x350 | 660x420x370 | 780x450x420 | 600x440x360 | |
| Material Hopper Dimensions (HxWxD) | 400x360x260 | 400x360x260 | 500x360x260 | / | |
| Main Controller N. W (kg) | 45 | 45 | 65 | 20 | |
| Material Hopper N. W (kg) | 6 | 6 | 7 | 6 | |
| Package size ( LxWxH m) |
0.84x0.55x0.77 | 0.84x0.55x0.77 | 1.01x0.6x0.93 | 0.51x0.51x0.81 | |
Dust removal equipment, refers to the dust from the flue gas separation equipment, also known as Dust Collector or dust removal equipment
The application of electrostatic precipitation technology in the application of high temperature flue gas dust control in power plant. Due to the limitation of the dust removal mechanism, the dust removal efficiency of electrostatic precipitator technology has been greatly improved, and the new electrostatic precipitator system can control the emission concentration of 100mg/m3. At the same time, the dust removal efficiency due to dust resistivity changes, in actual operation, the fuel uncertainty resulting from conditions of flue gas parameters deviate from the design values, resulting in dust emission concentration is often much higher than the design values of emission control. With the continuous improvement of the national pollution control requirements, the demand for micro dust emission is becoming more and more strict.
(1) mechanical dust removal equipment, including gravity dust removal equipment, inertial dust removal equipment, centrifugal dust removal equipment, etc..
(2) washing type dust collecting equipment comprises a water bath type dedusting equipment, foam dedusting equipment, dust removal equipment, Venturi tube water film dedusting equipment etc..
(3) the filter type dust removing equipment comprises a bag dust removing device and a granular layer dust removing device, etc.
(4) electrostatic precipitator.
(5) magnetic dust removal equipment.
Our company is specialized in the production of dust removal equipment company, has 50 years of manufacturing experience. Our products are sold all over the world. Welcome to buy our products.
The Dust Removal Equipment,High Performance Dust Removing Equipment,Paper Mill Dust Removal Equipment
Wuxi Weishitiong Machinery Co., Ltd. , http://www.madeinwst.com