Professional Grade Chassis Guarder, Rubberized Undercoating for Car Care

CAR RUBBERIZED UNDERCOATING

Features:
Tough black coating for vehicle, under-body protection. Protects against stone chips, rust and salt corrosion, Wildly used around automotive chassis and industry filed.

Directions:

1. Keep the place where need to spray dry, clean, no oil blot and film, and covering the place where no need to spray.
2. Shake before use and let ball inside can roll freely. Shake during working.
3. Try out on waste object.
4. Fully shake and spray on the object at a distance of 20-30cm. Spray thin film on the object repeatedly will be better then spray thick film on the object at one time.
5. Work in the temperature between21ºC to 32C ºCcan get the best effect, places where be sprayed by mistake can be cleaned by rag with water or volatile liquid.
6. If a mount of content can't be sprayed out before it almost be used up, you can press the spray nozzle,upside down the can and spray 2-3 seconds.
7. After use, clean the spray nozzle ,upside down it and spray till clean air can be found.
8. This product can get dry about 4-6 hours after use, and the exact time will depend on temperature.

Precaution:
Don't puncture and burn the can.
Don't use it near the flame ,forbid long time exposure to sunlight,  storage in high temperate (above 49ºC).
Avoid contact with eyes, skin and clothing.Do not swallow it.
Use it in well-ventilated area.if find it's hard to breath during using,please stop and be away to breath fresh air. if no remission please see doctor immediately.
If eyes contacted,rinse with water at least 15 minutes and go to the hospital immediately.if skin contact, wash it by water.
Keep out of the reach of children.
After using, spray paint on the surface to get more beautiful.
Should not be used on the catalytic converter, exhaust system, engine, rotating shaft and other extremely high temperature parts.
No long time storage in the boot of the car .

About Us
1. Technology and equipment
Brings in Britain KP system, Italian COSTER system, Switzerland PAMASOL system, and series of professional automatic aerosol created system. Tonyin group adhere to the philosophy of "Green environmental protection, High aspirations of success; Scientific and technical innovation, Unity is strength".
2. Certificate
It havs passed the identification of "ISO9001:2008 quality system", "ISO14001 environment system certificate", "Safe Production license of the dangerous chemicals" and "OHSAS18001 occupational,health and safety management system certificate". Auto Parts products have obtained CCC, DOT, ECE and GCC certifications etc. , and Car Care & Maintenance and Home Care products have passed SGS laboratory testing and achieved international qualieautifying and maintenance, car air treatment, fuel system conservation anty standards.
3. Products line
We have more than 120 kinds, 10 series of car detailing & cleaner products, for Glass, Tyres & Wheels, Paint, Cooling system, Engine, Air conditioner, Chassis, and Oil. for example: Headlight Restore, Windshield Washer Solvent, Wax, Spray Wax, Nano Chrome Paint, Nano Ceramic Coating, Tyre Sealent, Tyre & Wheel Cleaner, Leather Coating, Tyre Shine, Hand Soap, R134A, Wash & Wax (Shampoo), Carbon Cleaner, Lubricant, Gasoline Treatment, Injector Cleaner, Octance Booster, Brake & Parts Cleaner, Brake Fluid DOT-4, ATF Oil.....etc.
Due to the professional R & D team , the compnay continually keep launching new products and take the initiative in the markets.

Factory Overview:


 

CAR RUBBERIZED UNDERCOATING

Features:
Tough black coating for vehicle, under-body protection. Protects against stone chips, rust and salt corrosion, Wildly used around automotive chassis and industry filed.

Directions:

1. Keep the place where need to spray dry, clean, no oil blot and film, and covering the place where no need to spray.
2. Shake before use and let ball inside can roll freely. Shake during working.
3. Try out on waste object.
4. Fully shake and spray on the object at a distance of 20-30cm. Spray thin film on the object repeatedly will be better then spray thick film on the object at one time.
5. Work in the temperature between21ºC to 32C ºCcan get the best effect, places where be sprayed by mistake can be cleaned by rag with water or volatile liquid.
6. If a mount of content can't be sprayed out before it almost be used up, you can press the spray nozzle,upside down the can and spray 2-3 seconds.
7. After use, clean the spray nozzle ,upside down it and spray till clean air can be found.
8. This product can get dry about 4-6 hours after use, and the exact time will depend on temperature.

Precaution:
Don't puncture and burn the can.
Don't use it near the flame ,forbid long time exposure to sunlight,  storage in high temperate (above 49ºC).
Avoid contact with eyes, skin and clothing.Do not swallow it.
Use it in well-ventilated area.if find it's hard to breath during using,please stop and be away to breath fresh air. if no remission please see doctor immediately.
If eyes contacted,rinse with water at least 15 minutes and go to the hospital immediately.if skin contact, wash it by water.
Keep out of the reach of children.
After using, spray paint on the surface to get more beautiful.
Should not be used on the catalytic converter, exhaust system, engine, rotating shaft and other extremely high temperature parts.
No long time storage in the boot of the car .

About Us
1. Technology and equipment
Brings in Britain KP system, Italian COSTER system, Switzerland PAMASOL system, and series of professional automatic aerosol created system. Tonyin group adhere to the philosophy of "Green environmental protection, High aspirations of success; Scientific and technical innovation, Unity is strength".
2. Certificate
It havs passed the identification of "ISO9001:2008 quality system", "ISO14001 environment system certificate", "Safe Production license of the dangerous chemicals" and "OHSAS18001 occupational,health and safety management system certificate". Auto Parts products have obtained CCC, DOT, ECE and GCC certifications etc. , and Car Care & Maintenance and Home Care products have passed SGS laboratory testing and achieved international qualieautifying and maintenance, car air treatment, fuel system conservation anty standards.
3. Products line
We have more than 120 kinds, 10 series of car detailing & cleaner products, for Glass, Tyres & Wheels, Paint, Cooling system, Engine, Air conditioner, Chassis, and Oil. for example: Headlight Restore, Windshield Washer Solvent, Wax, Spray Wax, Nano Chrome Paint, Nano Ceramic Coating, Tyre Sealent, Tyre & Wheel Cleaner, Leather Coating, Tyre Shine, Hand Soap, R134A, Wash & Wax (Shampoo), Carbon Cleaner, Lubricant, Gasoline Treatment, Injector Cleaner, Octance Booster, Brake & Parts Cleaner, Brake Fluid DOT-4, ATF Oil.....etc.
Due to the professional R & D team , the compnay continually keep launching new products and take the initiative in the markets.

Factory Overview:


 

High Temperature Heat Pump

High Temperature Heat Pump,Industrial Hot Water Heat Pump,Industry Heat Pump Water Heater,High Temperature Air To Water Heat Pump

Guangdong Shunde O.S.B. Environmental Technology CO.,LTD. , https://www.heatpump-osb.com