Rolling Shutter Door Slats Panel Roll Forming Machine Made in China

Main Shaft Material: 45# Steel
Main Motor Power: 4kw
Power Supply: 380V, 3-Phase,50Hz or Any
Forming Speed: 8-12m/Min
Roll Station: 13 Stands
Frame: 16mm
Shaft Diameter: 38mm
Feeding Thickness: 0.5mm to 1.2mm
Cutter Standard: Gcr12
Roller Standard: 45# Steel with Cr
Trademark: Tianyu
Transport Package: 20FT Container or 40FT Container
Specification: 3000*800*1100
Origin: China
HS Code: 8462219000
Rolling shutter door slats panel roll forming machine made in China

Product Description
Control System PLC Colored Touch Screen
Main shaft material 45# steel
Hydraulic pump motor 3kw
Main Motor Power 4kw
Power Supply 380V, 3-Phase,50Hz or any
Forming Speed 8-12m/min
Roll Station 13 stands
Frame 300mm H steel
Middle panel thickness 16mm
Shaft Diameter 38 mm
Feeding Thickness 0.5mm to 1.2mm
Cutter Standard GCr12
Roller Standard 45# steel with Cr
Wheel Quenching treatment. Hardness: 62.
Dimension 3000mm*800mm*1000mm

Components of line

(1) Manual Decoiler   (Max.Capacity:5T   Coil Inner-Diameter: 508mm)

(2)Roll-Forming M/C (Just for your reference, will make the machine as your drawing)
Rolling Shutter Door Slats Panel Roll Forming Machine Made in China


(3) Cutting Mechanism
It adopts hydraulic motor drive and automatic location to decide the dimension and cut the target products.
Rolling Shutter Door Slats Panel Roll Forming Machine Made in China
Rolling Shutter Door Slats Panel Roll Forming Machine Made in China



(4) Hydraulic System
Match equipment: a set of hydraulic tank , a set of hydraulic Oil Pump, two hydraulic pipes and two sets of electromagnetism valves.
Hydraulic pump power: 4KW

(5)Computer control cabinet :
1). Screen: DELTA screen from Taiwan
2) PLC: DELTA
3). Automatic length measurement
4). Automatic quantity measurement
5).Computer is used to control length and quantity. Machine will automatically cut to length and stop when required quantity is achieved

(6)Counter
One counter gauges length, pulses, and decides length

(7)Output table (3M one set)


Our service

1.We have professional team to make different kinds of roll forming machines for our customers, from designing, processing,assembling, debugging, delivery.

2.we can send our engineer to your site and do the training for your men. you just only bear the cost for our engineer's air ticket,visa,accormadation,food and transpotaion in your country.

3.You can send your men to our factory. we will teach them how to operate the machine without training charges.

4.Actually theres another cheap and easy way to choose. Every machine leave our factory with one book of operation manual. You can read through the manaul first ,and get familiar with the machine. Then we can get a video call,and teach you on-line  how to operate the machine.

5.Apart from above training course,we also provide 1 year warranty for all the easily broken part of the machine for free and whole-life technical service support.

If there is any problems happened to the machine, we will provide solution at once.

Hope we could establish win-win business relations in the soon future!

Rolling Shutter Door Slats Panel Roll Forming Machine Made in China



FAQ

Q:How is this machine's service life?

A:In the normal maintenance,the service life at least 8 years.

Q:How to maintenance?
A:If using frequently,best coating lubricant on the chain and two ends of the shaft every month,replace the hydraulic oil every 1-2 years.

Q:What can you do if the machine broken?
A:Our machine's warranty period is 1 year,if the broken parts can't repair,we can free send the new parts replace the broken parts to you except the solenoid valve,the solenoid valve you must pay the express cost yourself.if after warranty period,we can through negotiationfor to solve the problems,and we supply the technical support for the whole life of the equipment.

Q:Can you be responsible for transport?
A:Yes,please tell me the destination port or address.we have rich experience in transport.

Q:Mr.Alan,can you make the machine according to my design or proto type?
A: Yes. We have an experienced team for working out the most suitable design and production plan for the machine that you are going to book with us.

Q:How many workers operate this machine to manufacture?
A:Only 1-2 worker.

Q:Can you supply the raw materials?
A:Yes,we can supply the galvanized steel coil,galvalume steel coil,color steel coil,and aluminum coil.


Contact us

Rolling Shutter Door Slats Panel Roll Forming Machine Made in China
 

Engine Parts

Engine Parts,Motor Engine Parts ,Engine Bearings ,Car Accessories

Engineering & Construction Machinery Parts Co., Ltd. , http://www.nbengineparts.com

Posted on