Steel Metal Decking Building Material Roll Forming Machine Supplier Vietnman

Model NO.: BOSJ-S
Customized: Customized
Advantage: Easy to Maintenance
Condition: New
Control System: PLC Control System
Making Machine: Multifunctional
Material of Roller: Gcr 15
Production Speed: 8-10m/Min
Roller Axis: 65mm
Trademark: BOSJ
Transport Package: Wooden Cases
Origin: Jaingsu China
HS Code: 8455212000
Marine Steel Scaffolding Planks Board Walkboard Roll Forming Machine
1,Unit performance
 
The thickness of material sheet: 1.2-1.8,the product drawings need to be confirmed by buyer
 
The width of material: 250≤§≤520
 
Product speed: 0-8m/min
 
Occupy groud area:  length 30m xwidth 3m
 
Total power: about 62kw
 
2,Equipment structure
 
It is composed of passived-decoiler, leveler, servo feeding machine, punching machine, roll forming machine, hydraulic cutting machine, collection table, electrical control system etc.
 
3,Each part main parameter:
 
3,1 Passived Decoiler 
Decoiler: decoiler,  Inner expanding type,  capacity:5T
Inner diameter material roll: ¢480~¢520mm
Outter diameter material roll: ≤1500mm
 
3,2 Leveler
Motor: 7.5KW  Frequency conversion motor
 
3,3 Servo Feeding machine
Drive: 4 kw  Servo motor
 

3,4 Punching machine
punching press: JF21-110
Maximum press: 110tons
Material of mould: Material:Cr12Mov,  Quenching,Hardness:HRC58-62º
Quantity of punching dies:1sets
 
3,5 Forming machine
Rack: cast iron frame,  
Forming stations: 16 stations
Material of bearing 40Cr, quenching treatment  
Material:GCr15, Quenching, Hardness:HRC58-62º
Motor power:  30KW Frequency conversion motor ZQ500 reducer
Drive type:  every rack has one gear power distribution box.
 Steel Metal Decking Building Material Roll Forming Machine Supplier Vietnman

3,6 Hydraulic cutting
Hydraulic pressure cutting 
Hydraulic pressure pump:5.5KW
Material of cutting blade: Cr12, Quenching
Hydraulic cutting quantity:1piece


 
3,7 Electronic controlling: PLC 
 
 
Main Machine Parameter
No. Item Unit Data Remark

1
Raw material Type   MS\galvanized sheet  
Strength of panel Map ≥350  
Thickness of panel mm 1.2~2.0  
2 Size mm See figure  
3 Speed m/min 6~8  
4 Material of roller   GCr15Hardening treatment  
5 Drive type   Gear box  
6 Total power kw About 45  
7 Electrical system   PLC Inverter control  
8 Contour dimension(L*W*H) m 35X4X3.9  
 
Delivery of machine


Related Products
The details of the scaffolding machine
NO. CONTENTS
1 Scaffolding plank standing tube welding device
2 Scaffolding plank ledger welding device
 
3
 
Punching Device
Full automatic punching device
Semi-automatic punching device
Manual punching device
Spare part:punching mould
 
4
 
diagonal brace flattening &punching device
Full automatic diagonal brace flattening &punching device
Semi automatic  diagonal brace flattening &punching device
Manual  diagonal brace flattening &punching device
Spare part:punching mould
 
5
 
Tube cutting machine
Auto Blade cutting Device
Swing saw cutting device
Direct saw cutting device
Auto direct saw cutting device
6 Auto Scaffolding plank wedling line Auto robot welding
Auto robot hand welding
7 Base jack & U-head jack welding device
8 Auto scaffolding plank roll forming machine

Introductions of the scaffolding machine
1. Scaffolding plank standing tube welding device
 Equipment function:
It is mainly used in auto seam welding for steel tubular scaffold pipe and disk plate, it also can add
Main Parameter:
Length:1-3m
Tube diameter:¢48mm &¢60mm
Disk plate quantity:1-6 pcs
Length tolerance:≤0.5mm
Basic component:
It consists of 13 sets inveter gas welding device and special device
More standing tube choices:
 
 
 
2. Scaffold ledger welding device
Equipment function:
  It is mainly used in auto seam welding for steel tubular scaffold ledger wedge head and tube.
Main Parameter:
Length:0.5-3m
Tube diameter:¢48mm
Welding quantity:2 pcs
Length tolerance:≤0.5mm
Basic component:
It consists of 2 sets inveter gas welding device and special device
More ledger choices:
 
 
 Steel Metal Decking Building Material Roll Forming Machine Supplier Vietnman

 
3. Scaffold tube punching device
Equipment function:
   It is mainly used in punching holes for standing tube ends
Basic parameter:
Length: 1-3m
Tube diameter:¢48mm&¢60mm
Length tolerance: ≤0.5mm
Basic component:
It consists of auto feeding system, seam positioning system (it only works at full auto equipment),hydraulic punching system, auto collection system(it only works at full auto equipment) and other systems.
 
 
4. diagonal brace flattening &punching device
Equipment function:
It is mainly used in flattening &punching for diagonal brace both ends
Basic parameters:
Length:0.5~3m
Tube diameter:¢33mm or ¢48mm
Length tolerance:≤0.5mm
Basic component: It consists of auto feeding system, seam positioning system(it only works at full auto equipment),hydraulic punching system, auto collection system(it only works at full auto equipment) and other systems.
 Steel Metal Decking Building Material Roll Forming Machine Supplier Vietnman

 
5.Tube Cutting Machine
Main function:
It is mainly used tube cutting
Basic parameter:
Length:0.6~3m
Tube diameter:¢33m,¢48mm and ¢60mm
Length tolerance:≤0.5mm

Auto Blade cutting device:
 
Saw tube cutting device:
 
6.Auto scaffold welding device
 
Main function:
It is mainly used in auto welding for scaffold end cap and stiffener
Basic parameter:
Length:0.6-3m
Length tolerence:≤1mm
Basic component:
No. Name Type Quanti. Remark
1 Welding robot hand 4200X650X500 1 Double welding head
2 Welding power supply(optional) MAGMEET350 2 Supplied by buyer
3 Working clamp   2  
4 positioner   2 optional
5 Moving rail and parts 13m 1  
6 Electric control system   1  
 
 
 Adjustment screw welding device
 
Equipment function:
It is mainly used in welding for scaffolding base and U-head jack screw.
Basic parameter:
Length:0.3-1.0m
Length tolerance:≤0.5mm
Basic component: It consists of welding device and special device.
 
 

 

DIN Ball Valve

The ball valve, the opening and closing (ball) is driven by the stem and revolves around the axis of the ball valve. The sealing performance is good,the seal of the hard sealed ball valve is made by artificial grinding until the valve core is in perfect agreement with the seal ring.  So its sealing performance is reliable.The switch is light.

We provide trunnion ball valve,electric ball valve,motorized ball valve,on off ball valve etc.
Production Size:DN15-DN250mm

Pressure range:PN10,PN16

Design Standard:DIN3357/EN12516

Face to Face:DIN3202/EN558-1 DN15-DN100(F4) DN125-DN250(F5)

Flange Standard:EN 1092/DIN2533

Testing Standard:EN12266

Main Material of parts:

Body:GG20/GG25/GGG45/GGG50

Bonnet:GG20/GG25/GGG45/GGG50

Ball:2Cr13/SS304/SS316

Seat:PTFE/RPTFE/TFM1600

Ball valves are widely used in petroleum refining, long-distance pipeline, chemical industry, paper, pharmaceutical, water conservancy, electric power, municipal, steel and other industries.

Ball Valve

Metal Seated Ball Valve,Double Block And Bleed Ball Valve,Hydraulic Ball Valve,Double Union Ball Valve

CANGZHOU HENGJIA PIPELINE CO.,LTD , http://www.czhjpipe.com

Posted on