First, the pressure type handheld automatic locking screw machine
Hand-held automatic locking screw machine is composed of a locking tool and an automatic screw feeding machine. It automatically sends the screw to the claw in the mouth of the screwdriver. When holding the tool, the locking screw is pressed and a screw is locked. It will automatically Fast delivery of the next screw saves operating time and increases productivity.
1, do not use the hand-screw, the screw automatically feed, and use the liberated one hand can do pick and place products and other work
2, the efficiency of 40PCS/MIN; with the automatic transmission screw machine, how fast can lock more quickly;
3, strong versatility, hand-held screwdrivers, flexible operation, suitable for operation at a fixed point;
4, hand-held tools small and beautiful, adjustable torque, with the spring crane or balance arm, more effort;
5, screw supply is rapid and reliable, transmission distance up to 4 meters, nail delivery machine can be placed under the table, saving space.
Second, straight-locked handheld automatic locking screw machine to solve the various defects of the handheld automatic lock screw machine:
1. The locking mechanism is bulky and increases employee fatigue;
2, the screw is not aligned with the threaded hole;
3, card material difficult to handle;
4. Long time for employees to adapt;
All the above problems are solved!
Third, the emulation type handheld automatic screw machine
1. The simulation screw machine is a new generation of products updated on the basis of hand-held. Features:
2. Automatic screwing machine mainly consists of sorting, separating and locking.
3, compared to a screw with a screw in one hand and an electric screwdriver in one hand, the emulated automatic lock screw machine can solve 4, put one hand out,
5, only need to put the product well, the operator needs to be paid in order to complete the simulation template.
6, to avoid improper operation, resulting in bad.
7, the operation is simple, convenient and cost-effective.
Length: 6m-18m
Top diameter: 150mm-230mm/by buyer
Taper: 1:75/by buyer
Advantage: high quality, easy operation
Pre-stressed concrete pole mould is used for electronic concrete pole making. Its mainly manufacture technology is longitudinal tension by steel wires. Then it can squeeze out the excess water in the concrete under the centrifugal force. Thus, it can greatly improve the concrete density and strength.
In order to form concrete more quickly to meet the design strength of more than 70%, steam curing can be carried out so as to shorten the mould-releasing cycle.
Our factory produces two categories of Pre-stressed concrete pole steel moulds, DMZ&DMD. The Pre-stressed Electric Poles by this series equipment comply with the China Standard JC/T364-2001.
Features:
1. Welding technology, which enhances the smooth finish of the mould wall, and eliminates the uneven traces of rivet holes. So the concrete poles appearance will be improved significantly.
2. The cylinder is changed to U-type longitudinal stiffeners which can greatly increase the stiffness and flexural strength of the Steel Mould,
3. Install the slot with rubber sealing strip, in order to prevent leakage to ensure quality.
The Technical parameter:
Inside Diameter(mm)
Wheel Distance(mm)
Wheel Diameter (mm)
Length(mm)
Ø100
2000
Ø600
6-7
Ø110
2000
Ø600
6-7
Ø120
2000
Ø600
6-8
Ø130
2000
Ø600
6-8
Ø150
2000
Ø600
6-10
Ø170
2000
Ø600
6-12
Ø190
2000
Ø600
7-12
Ø190
2000
Ø650
15-18
Ø230
2000
Ø650
6-9
Ø310
2000
Ø650
6-9
Ø350
2000
Ø680
6-9
Ø390
2000
Ø750
6-9
Centrifugal Machine,Spun Prestressed Pole Mould ,Spc Pole Mould,Spc Pole Mould In Bangladesh
Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , http://www.jshaiheng.com