Products Introduction: The belt cleaner is designed to maintain the correct angle of attack and appropriate pressure against the conveyor belt throughout the service life of the blades, and under normal conditional there is no need for adjustments.Â
Â
The blades are shaped for maximum removal of carry back and minimun material build up on the cleaner itself. The blade shape and the spring tension maintain an efficient relatively constant cleaning pressure against the conveyor belt as the blade wear down.
Â
Â
V-shaped non-loaded cleaner
V-shaped non-loaded cleaners are mainly used for cleaning the belt around the bend pulley in return strand, which can insure the belt in clean condition and prevent big materials sticked between pulleys and belts to damage the equipment. This kind of cleaners have been widely used in kinds of industries, such as metallurgy, mines, cement and chemical engineering.
Technology parametersÂ
| widthB(mm) | 500 | 650 | 800 | 1000 | 1200 | 1400(1600) | |||||||||||||||||
| height H(mm) | 80 | 120 | 160 | 80 | 120 | 160 | 120 | 160 | 200 | 160 | 200 | 240 | 200 | 240 | 300 | 200 | 240 | 300 | 400 | ||||
| clapboardheight(mm) | 75 | 110 | 150 | 75 | 110 | 150 | 110 | 150 | 180 | 150 | 180 | 220 | 180 | 220 | 280 | 180 | 220 | 280 | 360 | ||||
| belt V(m/s) | 0.8  1.0  1.25  1.6  2.0 2.5  3.15  4.0 | ||||||||||||||||||||||
|  Transmission roller D(mm) |
400,500 | 400,500,630 | 500,630,800 | 630,800,1000 | 630,800,1000,1250 | 800,1000,1250,1400 | |||||||||||||||||
|  Redirection diameter         (mm) |
400 | 400,500 | 400,500,630 | 500,630,800 | 500,630,800,1000 | 630,800,1000,1250 | |||||||||||||||||
|  Roller diameter (mm) |
Φ89 | Φ108 | |||||||||||||||||||||
| Nominal dip Angle | 0-300   300  400 450  500  550 600 650 700  750 800 850 900 | ||||||||||||||||||||||
| Allow dip Angle | 0-900 | ||||||||||||||||||||||
Technical feature:
Â
|
Product Description |
V-shaped non-loaded cleaners are mainly used for cleaning the belt around the bend pulley in return strand, which can insure the belt in clean condition and prevent big materials sticked between pulleys and belts to damage the equipment. This kind of cleaners have been widely used in kinds of industries, such as metallurgy, mines, cement and chemical engineering. |
| Technical  performance |
1.Unique design of scraper, which can clean scrap and water out of the belt; 2.The scraper is made of Polyurethane, which is of abrasion resistance, long service life and low replacement cost; 3.High-strength and anticorrosive rigging turn buckles can adjust the cleaners precisely, freely and quickly, which can be insured to work in optimized condition. |
Company Introductin
LIBO Heavy Industries Science & Technology Co., Ltd ( short for LBHI ) dedicates to research, design, manufacture, erecting, commissioning bulk material handling system as well as EPC projects. LBHI is top bulk material handling system global supplier. Our solutions are mainly applied in mining, harbor, power plant, cement plant, metallurgy, etc. as well as coal mine industries. We supplies about 200 km conveyors to our clients all over the world every year. Annual turn over is more than 300 million US dollar.
Â
Brief Advantages of LBHI / LIBO:
Â
Â
| Manufacture | LBHI has above 10 years experience in mining machinery manufacturing |
| Experience | Well equipped with complete facilities, more than 300 rich experienced |
| Company technical strenghth | engineers and more than 500 skilled employees |
FAQ:
We have a professional design and after-sales staff,
Â
We have the largest factories and production capacity,
Â
We have a professional sales and service team,
Choose LIBO is Choose Win Win!
Â
Â
If you have any questions please do not hesitate to contact us !
Products Introduction: The belt cleaner is designed to maintain the correct angle of attack and appropriate pressure against the conveyor belt throughout the service life of the blades, and under normal conditional there is no need for adjustments.Â
Â
The blades are shaped for maximum removal of carry back and minimun material build up on the cleaner itself. The blade shape and the spring tension maintain an efficient relatively constant cleaning pressure against the conveyor belt as the blade wear down.
Â
Â
V-shaped non-loaded cleaner
V-shaped non-loaded cleaners are mainly used for cleaning the belt around the bend pulley in return strand, which can insure the belt in clean condition and prevent big materials sticked between pulleys and belts to damage the equipment. This kind of cleaners have been widely used in kinds of industries, such as metallurgy, mines, cement and chemical engineering.
Technology parametersÂ
| widthB(mm) | 500 | 650 | 800 | 1000 | 1200 | 1400(1600) | |||||||||||||||||
| height H(mm) | 80 | 120 | 160 | 80 | 120 | 160 | 120 | 160 | 200 | 160 | 200 | 240 | 200 | 240 | 300 | 200 | 240 | 300 | 400 | ||||
| clapboardheight(mm) | 75 | 110 | 150 | 75 | 110 | 150 | 110 | 150 | 180 | 150 | 180 | 220 | 180 | 220 | 280 | 180 | 220 | 280 | 360 | ||||
| belt V(m/s) | 0.8  1.0  1.25  1.6  2.0 2.5  3.15  4.0 | ||||||||||||||||||||||
|  Transmission roller D(mm) |
400,500 | 400,500,630 | 500,630,800 | 630,800,1000 | 630,800,1000,1250 | 800,1000,1250,1400 | |||||||||||||||||
|  Redirection diameter         (mm) |
400 | 400,500 | 400,500,630 | 500,630,800 | 500,630,800,1000 | 630,800,1000,1250 | |||||||||||||||||
|  Roller diameter (mm) |
Φ89 | Φ108 | |||||||||||||||||||||
| Nominal dip Angle | 0-300   300  400 450  500  550 600 650 700  750 800 850 900 | ||||||||||||||||||||||
| Allow dip Angle | 0-900 | ||||||||||||||||||||||
Technical feature:
Â
|
Product Description |
V-shaped non-loaded cleaners are mainly used for cleaning the belt around the bend pulley in return strand, which can insure the belt in clean condition and prevent big materials sticked between pulleys and belts to damage the equipment. This kind of cleaners have been widely used in kinds of industries, such as metallurgy, mines, cement and chemical engineering. |
| Technical  performance |
1.Unique design of scraper, which can clean scrap and water out of the belt; 2.The scraper is made of Polyurethane, which is of abrasion resistance, long service life and low replacement cost; 3.High-strength and anticorrosive rigging turn buckles can adjust the cleaners precisely, freely and quickly, which can be insured to work in optimized condition. |
Company Introductin
LIBO Heavy Industries Science & Technology Co., Ltd ( short for LBHI ) dedicates to research, design, manufacture, erecting, commissioning bulk material handling system as well as EPC projects. LBHI is top bulk material handling system global supplier. Our solutions are mainly applied in mining, harbor, power plant, cement plant, metallurgy, etc. as well as coal mine industries. We supplies about 200 km conveyors to our clients all over the world every year. Annual turn over is more than 300 million US dollar.
Â
Brief Advantages of LBHI / LIBO:
Â
Â
| Manufacture | LBHI has above 10 years experience in mining machinery manufacturing |
| Experience | Well equipped with complete facilities, more than 300 rich experienced |
| Company technical strenghth | engineers and more than 500 skilled employees |
FAQ:
We have a professional design and after-sales staff,
Â
We have the largest factories and production capacity,
Â
We have a professional sales and service team,
Choose LIBO is Choose Win Win!
Â
Â
If you have any questions please do not hesitate to contact us !
Concrete Pile Spinning/Centrifugal Machine:
Concrete Pile Spinning/Centrifugal Machine is mainly apply to produce High strength centrifugal technology concrete spun piles of difference diameter and length, Prestressed Reinforced concrete pole(SPC pole) by spinning formed. According to customer's effeciency request, there are Single wheel spinning machine and Double wheel spinning machine at customer's option, it is equipped with a stepless speed-variation motor and a control panel, it works smoothly and its speeder is of wide-range. Its box base is sturdy and durable and easy for installation.
Our Pile Spinning Machine's Advantages:
1. Unique "slot" design, change the screw limit between the bearing support and the base plate with the card slot and bolt limit. Both up and down sides of the spinning machine panel, undersurface and two sides of bearing support go through fine machining. Though the process is complex, it makes it more solid during high-frequency vibration of bearing support and the floor. Repair and replacement also have interchangeability.
2. Connection shaft is whole shaft, to avoid stress concentration brought by shaft diameter changes, resulting in the phenomenon of "shaft-broken".
3. The limit side of the support wheel is removable. It is convenient for users to replace.
4. Frequency-conversion cabinet of spinning machine records process parameter of each pipe and output reports, provides the office computer data communication interface.
Spinning Machine Technical Parameter:
|
Wheel Distance(mm) |
2000 |
|
Central wheel Distance(mm) |
950-1200 |
|
Wheel Diameteri(mm) |
600 |
|
Axle Diameter(mm) |
110-125 |
|
Automatic controller for centrifugal concrete pile machine |
|
We can Customize for you. If you have any questions, please contact with us. Welcome you can visit our Factory.For inqury,Please send mail directly to us.
Concrete Pile Spinning Machine
Concrete Spinning Machine,Spun Pile Centrifugal Machine,Concrete Pile Spinning Machine,Pole Spinning Machine
Jiangsu Haiheng Building-Materials Machinery Co.,Ltd , https://www.jshaiheng.com