Model NO.: TSD-330A Three-axis Simulation Turntable
Rotation Angle: Continuous Rotation
Max. Payload Size: 300mm X 300mm X 300mm
Triaxial Intersection: R<0.5mm (Design Processing Guarantee)
Accuracy of Angular Positioning: ±10"(Three Axis)
Angular Position Resolution: 0.36"
Angular Rate Resolution: 0.001°/S
Mean Time Between Failure: ≥3000h
Model NO.: TSD-330A Three-axis Simulation Turntable
Rotation Angle: Continuous Rotation
Max. Payload Size: 300mm X 300mm X 300mm
Triaxial Intersection: R<0.5mm (Design Processing Guarantee)
Accuracy of Angular Positioning: ±10"(Three Axis)
Angular Position Resolution: 0.36"
Angular Rate Resolution: 0.001°/S
Mean Time Between Failure: ≥3000h
TSD-330A Three-axis Simulation Turntable
Application and requirementThe equipment has the ability to calibrate and simulate the angular velocity and position of the test products, with high precision, controllable and stable working ability.
Main technical parameter
- Structure type: U-O-O type
- Rotation Angle: continuous rotation
- Max. payload: 20KgÂ
- Max. payload size: 300mm x 300mm x 300mmÂ
- Rotating error of triaxial tilt Angle:±4"(interior axis),±6"(center axis),±4"(outline axis)
- Perpendicularity of interior axis and center axis:±5"
- Perpendicularity of center axis and outline axis:±3"
- Triaxial intersection: R<0.5mm (design processing guarantee)
- Accuracy of angular positioning:±10"(three axis)
- Angular position resolution: 0.36"
- Angular rate range: 0.001~400°/S (interior axis), 0.001~250°/S (center axis), 0.001~ 200°/S (outline axis)
- Angular rate accuracy and stability: 5 x 10-5(360° average), 5 x 10-4(10° average), 5 x 10-3(1° average)
- Angular rate resolution: 0.001°/S
- Max. angular acceleration: 500°/S2 (interior axis), 300°/S2(center axis), 200°/S2(outline axis)
- Signal interface: RS422 serial interface (output triaxial position rate information through serial interface, highest frequency 100Hz)
- Conductive slip ring: Ring number: 50 ring with 3A; Insulation resistance: ≥200 MΩ
- Load installation space magnetic strength: <0.2mT
- The turntable control computer uses high reliability IPC.
- MTBF: ≥3000h
- The equipment shall meet the relevant standards of China's electromagnetic compatibility and related standards for noise requirements.
TSD-330A Three-axis Simulation Turntable
Application and requirementThe equipment has the ability to calibrate and simulate the angular velocity and position of the test products, with high precision, controllable and stable working ability.
Main technical parameter
- Structure type: U-O-O type
- Rotation Angle: continuous rotation
- Max. payload: 20KgÂ
- Max. payload size: 300mm x 300mm x 300mmÂ
- Rotating error of triaxial tilt Angle:±4"(interior axis),±6"(center axis),±4"(outline axis)
- Perpendicularity of interior axis and center axis:±5"
- Perpendicularity of center axis and outline axis:±3"
- Triaxial intersection: R<0.5mm (design processing guarantee)
- Accuracy of angular positioning:±10"(three axis)
- Angular position resolution: 0.36"
- Angular rate range: 0.001~400°/S (interior axis), 0.001~250°/S (center axis), 0.001~ 200°/S (outline axis)
- Angular rate accuracy and stability: 5 x 10-5(360° average), 5 x 10-4(10° average), 5 x 10-3(1° average)
- Angular rate resolution: 0.001°/S
- Max. angular acceleration: 500°/S2 (interior axis), 300°/S2(center axis), 200°/S2(outline axis)
- Signal interface: RS422 serial interface (output triaxial position rate information through serial interface, highest frequency 100Hz)
- Conductive slip ring: Ring number: 50 ring with 3A; Insulation resistance: ≥200 MΩ
- Load installation space magnetic strength: <0.2mT
- The turntable control computer uses high reliability IPC.
- MTBF: ≥3000h
- The equipment shall meet the relevant standards of China's electromagnetic compatibility and related standards for noise requirements.
Description:: Hydraulic Cylinder Machined Port, Head, Rod End, Cylinder Body, Clevis
Material :: Steel bar / cast iron / Stainless steel casting / Forging
Standard :: ASTM, AISI, BS, JIS standard.
MFG process:: Casting / Forging + CNC Machining
Application:: Heavy Duty Hydraulic Cylinders
Key features:: Min.2800 kpa hydraulic pressure Yield strength (Min) :: 350mpa - 540 mpa
Hydraulic Cylinder Components,Cylinder Component Casting,Cylinder Repair Parts Casting,Hydraulic Cylinder Component Parts
J.B MACHINERY (NINGBO) CO., LTD. , https://www.jbcastings.com