What should you watch out for when you care for the sofa

When summer arrives, the weather not only starts to get hot, but the humidity also increases with the frequency of rain. As a must-have sofa in the home, in addition to a lot of knowledge in the purchase, it also requires special care in the maintenance, after all, whether the maintenance of furniture in place is directly related to its service life. Professionals say that the maintenance of leather sofas is the same as summer and summer diseases. Summer is the best time to maintain leather sofas. So, what should you pay attention to when you care for the sofa? Henan Jiewei Cleaning Products Co., Ltd. will do the following for everyone.
1, Khan more summer, the leather sofa leather pores will absorb sweat, high temperature and humidity will make the organic matter in the sweat and leather chemical reaction, easy to produce odor, therefore, to use a damp rag to wipe clean, cleaning should use a dedicated cleaning Products and care products to prevent chapped.
2. For the newly-purchased leather sofa, wet towels should be washed with water first, wring out to wipe the dust and dirt on the sofa surface, avoid washing with water or rubbing with gasoline, and then wipe the surface of the sofa one or two times with a care agent. , Form a protective film on the surface of the dermis, so that the dirt is not easy to penetrate into the pores of the dermis.
3. In summer, not only do people wear less clothes, in order to make the sofa more breathable, many well-intentioned housewives will remove the sofa cushions on the leather sofas, so that special attention must be paid to avoid sharp leather scratches. If it is used improperly, it will cause small cracks and grind on the surface of the leather. You can use an egg to grind the ink. The color skin can be applied with the corresponding watercolor paint, and repeatedly applied. After the skin is dry, it can be rubbed with a leather coating or Vaseline. If the crack is relatively large, Then use a good quality Adhesive, such as Delphi, and apply evenly on both sides of the cut-out hole. After 8 to 10 minutes, tighten the break and align the adhesive. Finally, use an eraser to wipe off the glue trace left at the break.
4. When cleaning leather sofas in the summer, do not use strong chemical agents to clean the leather. Use diluted soap water or special leather cleaners as much as possible. Large supermarkets can generally buy them. Use a soft cloth when rubbing, and use less force.
5. Do not place hard objects on the sofa during normal use. In particular, children should be prevented from hurting after stepping on hard objects. This also affects the service life of the leather sofa.
6, the summer sunshine is strong, do not put the sofa in the sun for a long time, so as not to damage the cortex. If the living room is often exposed to sunlight, you may wish to adjust the position of several sofas at a time to prevent color differences; if it is a place with high humidity, you can use the weak sunlight for 8 to 10 in the morning for 7 days, 1 hour a day. Do it once in about 3 months. At the same time, the conditional family can keep the sofa dry in the air-conditioned room.
7, summer maintenance leather sofa should be regularly on the water wax to protect the leather.
In short, leather sofas and other materials of the sofa, the price is relatively expensive, so be sure to carefully purchase, careful maintenance. Henan Jiewei Cleaning Products Co., Ltd. reminds everyone: If you find in the summer there may be problems that cannot be solved by the leather sofa, such as cortex fading, hardened cortex, etc., be sure to consult the after-sales service department of the sofa in a timely manner. Why is it important to emphasize the importance of buying a leather sofa?

High Frequency Vibrating Screen introduction


High Frequency Vibrating Screen, simple structure,light weight to move and freely adjust height, The vibration frequency is high up to 3000 times per minute. High screening precision and efficiency, it applies to any powder,granule . In addition to electrical parts, the other parts are made of SUS304 or SUS316L.


Working principle

The high frequency Vibrating Sifter is a different working principle compared with ordinary screening device. Because of high frequency , it is able to destroy the tension on pulp surface, make small grain material vibrate at high speed on surface, able to accelerate to the separation of heavy organic minerals, increase the probability of material (smaller than separation degree) contact with screen hole. Thus this unique characteristic has created better separating condition that make the material (smaller than separation degree) pass the screen hole easily, especially the large proportion of grain and slurry, too.


high frequency vibrating sifter

High Frequency Sifter

High Frequency Sifter,Easy to Clean,High Frequency Sifte,High Frequency Screen

XINXIANG CHENWEI MACHINERY CO.,LTD , http://www.sieves.nl

Posted on