The following Engine brands, Alternator brands and Control panel brands for options:
Rated power | Engine | Alternator | Control panel |
 20kw~1300kw |  Cummins | Stamford Leroy Somer Marathon Mecc Alte ABB Chinese Alternators |
Deepsea ComAp Harsen Smartgen |
 8kw~1600kw |  Perkins | ||
 68kw~504kw |  Volvo | ||
 20kw~500kw |  Deutz | ||
 220kw-2400kw |  MTU | ||
 600kw-1800kw |  Mitsubishi | ||
 50kw-650kw |  Doosan Daewoo | ||
 2kw~2500kw |  Chinese Engines |
· Advance design, low maintenance, durable
· Direct fuel injection pump
· High power to weight ratio
· Multi-cylinder in-line 4, 6 up to vee 12
· Naturally aspirated or turbocharged
Alternator
· 4-pole, brushless, self-exciting, self-regulating
· Industrial standard, single bearing type
· Self-ventilated, screen protected
· Voltage regulation +1% at any fixed load
Optional Supply
· Weatherproof / Soundproof / Super soundproof enclosure
· Engine / alternator heaters
· Auto load sharing & synchronizing panel
· Auto Start / Auto Mains Failure (AMF) / ATS control panel, circuit breaker
Â
1. Specification of genset | |
Genset Model | SFC-375 |
Prime Power | 375KVA (300KW) |
Standby Power | 413KVA (330KW) |
Rated Voltage | 400V |
Rated Current | 540A |
Rated Frequency(HZ) | 50 |
Rated Speed | 1500rpm |
Power Factor | 0.8(lagging) |
Dimensions (mm) (L×W×H) | 3550*1200*1950 |
Gross Weight(kg) | 3200 |
2. Specification of diesel engine | |
Engine Brand | Cummins |
Engine Model | NTAA855-G7 |
Number of Cylinders | 6 |
Cylinder Arrangement | in-line |
Cycle | Four stroke |
Aspiration | Turbocharged, aftercooled |
Bore×Stroke (mm×mm) | 140 x 152 |
Displacement (Liter) | 14 |
Speed Governor | Electronic |
Fuel Consumption at 100% Load (l/h) | 194 |
Starting Method | DC24V electrical starting |
3. Specification of alternator | |
Alternator Brand | Stamford |
Alternator Model | HCI444FS |
Number of Phase | 3 |
Connecting Type | 3 Phase and 4 Wire |
Protection Grade | IP23 |
Altitude | ≤1000m |
Exciter Type |
Brushless, Self-exciting, AVR automatic voltage regulating, 100% Copper winding wire |
Insulation Class | H |
Telephone Influence Factor (TIF) | ≤50 |
THF | ≤2% |
Voltage Regulation, Steady State | ≤±1% |
Transient State Voltage | ≤-15%~+20% |
4. The components of the generator set | |
1) Cummins Engine  2) Stamford Alternator  3) AMF control panel or Parallel Cabinet for choose | |
5. Specification of control panel | |
The control panel is AMF control panel with control module of Harsen from Hongkong. It is with LCD display of voltage, current, frequency, water temperature, oil pressure. The genset with low oil pressure, high water temperature, over speed, over load protection function. |
FAQ
What's your power range of diesel generator?Â
Answer: We can offer the range from 10kVA~3125kVA.Â
What's your delivery time?Â
Answer: 7Â workdays after we get the down payment.Â
What's your payment?Â
Answer: T/T, L/C, and 30% T/T as the deposit, the balance payment should be paid before shipping.Â
What's your warranty?Â
Answer: One year warranty or 1000 hours which comes first.Â
What's your MOQ?Â
Answer: 1Â set.Â
What's your frequency of diesel generator?Â
Answer: 50/60Hz
What's your voltage of diesel generator?Â
Answer: 220/110V, 380/220V, 400/230V, 415/240V, 440/260V, 460/270V, and double voltage…Â
The following Engine brands, Alternator brands and Control panel brands for options:
Rated power | Engine | Alternator | Control panel |
 20kw~1300kw |  Cummins | Stamford Leroy Somer Marathon Mecc Alte ABB Chinese Alternators |
Deepsea ComAp Harsen Smartgen |
 8kw~1600kw |  Perkins | ||
 68kw~504kw |  Volvo | ||
 20kw~500kw |  Deutz | ||
 220kw-2400kw |  MTU | ||
 600kw-1800kw |  Mitsubishi | ||
 50kw-650kw |  Doosan Daewoo | ||
 2kw~2500kw |  Chinese Engines |
· Advance design, low maintenance, durable
· Direct fuel injection pump
· High power to weight ratio
· Multi-cylinder in-line 4, 6 up to vee 12
· Naturally aspirated or turbocharged
Alternator
· 4-pole, brushless, self-exciting, self-regulating
· Industrial standard, single bearing type
· Self-ventilated, screen protected
· Voltage regulation +1% at any fixed load
Optional Supply
· Weatherproof / Soundproof / Super soundproof enclosure
· Engine / alternator heaters
· Auto load sharing & synchronizing panel
· Auto Start / Auto Mains Failure (AMF) / ATS control panel, circuit breaker
Â
1. Specification of genset | |||||||||||||||||||||||||||||||||||||||||||||||||
Genset Model | SFC-375 | ||||||||||||||||||||||||||||||||||||||||||||||||
Prime Power | 375KVA (300KW) | ||||||||||||||||||||||||||||||||||||||||||||||||
Standby Power | 413KVA (330KW) | ||||||||||||||||||||||||||||||||||||||||||||||||
Rated Voltage | 400V | ||||||||||||||||||||||||||||||||||||||||||||||||
Rated Current | 540A | ||||||||||||||||||||||||||||||||||||||||||||||||
Rated Frequency(HZ) | 50 | ||||||||||||||||||||||||||||||||||||||||||||||||
Rated Speed | 1500rpm | ||||||||||||||||||||||||||||||||||||||||||||||||
Power Factor | 0.8(lagging) | ||||||||||||||||||||||||||||||||||||||||||||||||
Dimensions (mm) (L×W×H) | 3550*1200*1950 | ||||||||||||||||||||||||||||||||||||||||||||||||
Gross Weight(kg) | 3200 | ||||||||||||||||||||||||||||||||||||||||||||||||
2. Specification of diesel engine | |||||||||||||||||||||||||||||||||||||||||||||||||
Engine Brand< LINA Air Isolated Dispersion Kneader LINA air isolated Dispersion Mixer is used in high-quality titanium / aluminum / copper / nickel and other metal alloy formula synthesis and granulation, particularly suitable for discolored special ceramic feeding. This patented design provides a high air pressure with low oxygen content mixing environment is formed to ensure the material is kneading and pelletizing in a very low oxygen or oxygen-free state. This type of Internal Mixer is applicable for high - end Inorganic nonmetal like zirconia ceramics and rare earth permanent magnet, magneto-optical, superconducting, hydrogen storage and other rare earth alloys.
Technical Advantages of LINA Air-Isolated Dispersion Kneader 1. Double gas protection design: Within kneading and pelletizing process, material`s physical properties will change due to different temperature zones, the double gas protection design is adopted to achieve the purpose of protecting material`s physical property. This patented technology is used in the general comparison of titanium / aluminum / copper / nickel and other metal alloy formulations. 2. Advantage of Double gas protection + Air isolated combined technology: Under the technology of air isolated, the oxygen content in mixing chamber is significantly reduced. And with the design of double gas protection, a high air pressure with low oxygen content mixing environment is formed to ensure the material is kneading and pelletizing in a very low oxygen or oxygen-free state. This patented technology is used in high-quality titanium / aluminum / copper / nickel and other metal alloy formula synthesis and granulation, particularly suitable for discolored special ceramic feeding.
Specifications of LINA Air Isolated Dispersion Kneader
Air Isolated Kneader Rubber Air Isolated Internal Mixer,Plastic Air Isolated Dispersion Kneader,Dispersion Kneader,Sensitive Material Dispersion Mixer LINA Machinery Industrial Co.,Ltd , https://www.linakneader.com |