1. For water, CSD, hotfill, oil bottles
2. Capacity: 12000-41600BPH
3. CE, U
        5 gallon pc bottle blow molding machine
General description:
     This model of fully automatic rotary blow molding machinery is specially designed for high speed based on absorbing all international latest technology, it is mainly used in producing pure water bottle and carbonated soft drink bottle. With reasonable construct, less area taking, less utility consumption, stable capacity, it meets national food safety requirements.
Details of each equipment:
 Main advantages
      This machine is operated by TFT touch screen, several languages can be selected, and it is easy to operate with some multi-layer menu. Speed, technical data are displayed in the screen, so it is very easy to operate.
Special design of two steps blowing system, the pressure figure in the mould is scouted timely, so it can supply figure for operator to adjust. It will be helpful to the stability of bottle size. Â
Heating device adopted nine sections infrared to adjust the temperature, preheating area and adjusting area can be controlled according different technical requirements. To make sure the stability of techniques, the temperature is scouted all day.
The heating temperature can be adjusted according different perform and bottle size, you just need to input settled figure when you change different performs.
Equipped with automatic perform unscramble and elevator.
Main Mechanical Part
Material: aluminum alloy, carbon iron, stainless steel, alloy steel.
Bearing: import from Japan and Germany. Self-lubricating grease bearing from Igus.
High-pressure air valve: Norgren (Switzerland), Lucifer Parker (Switzerland), SMC (Japan), Seitz (Switzerland)
High-pressure vent muffle: Automuffler (USA)
Control pneumatic cylinder: Festo (Germany), Norgren (Switzerland), Lucifer Parker (Switzerland), SMC (Japan).
technical parameter:
| TYPE | ITEM | BX-600 | BX-1500 | BX-2500 | BX-5000 |
| CONTAINER | Number of cavity | 1 | 1 | 1 | 1 |
| Theoretical output | 1200-1400pcs/hr | 1000-1300 pcs/hr | 800-1200 pcs/hr | 500-700 pcs/hr | |
| Max.container volume | 0.6L | 1.5L | 2.5L | 5L | |
| Max.neck diameter | 65mm | 80mm | 90mm | 120mm | |
| Max.container diameter | 80mm | 105mm | 115mm | 200mm | |
| Max.container height | 260mm | 330mm | 350mm | 350mm | |
| ELECTRICAL SYSTEM | Number of lamp | 12pcs(1500w/pcs) | 16 pcs(1500w/pcs) | 16 pcs(1500w/pcs) | 24pcs |
| Max.heating power | 18kw | 24kw | 24kw | 36kw | |
| Installation power | 18.5kw | 24.5kw | 24.5kw | 40kw | |
| Actual power consumption | 8-12kw | 10-12kw | 12-14kw | 16-20kw | |
| AIR SYSTEM | Operatating pressure | 7kg/c | 7kg/c | 7kg/c | 7kg/c |
| Low pressure consuming | 800Ltr/min | 900 Ltr/min | 900 Ltr/min | 1200 Ltr/min | |
| Blowing pressure | ≤40kg/c | ≤40kg/c | ≤40kg/c | ≤40kg/c | |
| High pressure consuming | 1200-1600Ltr/min | 1200-1600Ltr/min | 1200-1600Ltr/min | 2000-2500Ltr/min | |
| WATER CHILLER | Operating pressure | 5-6 kg/c | 5-6 kg/c | 5-6 kg/c | 5-6 kg/c |
| Temperature | 10 | 10 | 10 | 10 | |
| Consuming | 3600kcal/hr | 3600kcal/hr | 3600kcal/hr | 5600kcal/hr | |
| Flow rater | 20Ltr/min | 20Ltr/min | 20Ltr/min | 30Ltr/min | |
| MACHINE | Machine dimension | 2.2×1.5×1.8(m) | 2.4×1.6×1.8(m) | 2.5×1.7×1.8(m) | 2.2×1.8×1.7(m) |
| Machine weight | 1.3T | 1.5T | 1.7T | Â Â Â Â Â Â Â Â 2.8T |
Â
Â
| Website | www.sswmachine.com |
| Salesperson | Alex Hou |
| Mobile | 0086-13606225421 |
| Â | Â |
| 365883438 | |
| Â | Â |
Â
Â
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.
Flowchat of Batch Waste Tyre Pyrolysis Plant
Advantages of Batch Waste Tyre Pyrolysis Plant
1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.
2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.
3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.
4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.
5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.
6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.
7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.
8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.
Technical Parameter of Batch Waste Tyre Pyrolysis Plant
|
NO. |
ITEM |
PROJECT |
|
|
1 |
Equipment Model |
XY-7 |
XY-8 |
|
2 |
Door Model |
Full Open Door |
Full Open Door |
|
3 |
Suitable Raw Materials |
Rubber/Plastic Products |
Rubber/Plastic Products |
|
4 |
Structure |
Horizontal Type Revolves |
Horizontal Type Revolves |
|
5 |
Reactor Size |
Φ2200*6000mm Φ2600*6600mm |
Φ2200*6000mm Φ2600*6600mm |
|
6 |
Capacity for One Batch |
5-6Mt; 8-10Mt |
5-6Mt; 8-10Mt |
|
7 |
Oil Yield of Tires |
40%-45% |
40%-45% |
|
8 |
Work Pressure |
Normal Pressure |
Normal Pressure |
|
9 |
Reactor Rotation Speed |
0.4R/M |
0.4R/M |
|
10 |
Fuels Choice |
Coal, Wood |
Coal, Wood, Gas, Oil |
|
11 |
Power |
18KW/H |
18-25KW/H |
|
12 |
Cooling Method |
Water Cycling |
Water Cycling |
|
13 |
Type of Drive |
External Annular Gear |
External Annular Gear |
|
14 |
Heating Method |
Direct |
Direct |
|
15 |
Type of Installation |
With Foundation |
With Foundation/Integrated Base |
|
16 |
Noise dB(A) |
≦85 |
≦85 |
|
17 |
Operation Mode |
Intermittent Operation |
Intermittent Operation |
|
18 |
Total Weight(MT) |
25-40 |
25-40 |
|
19 |
Installation Space Required |
30m*10m |
30m*10m |
|
20 |
Manpower |
3~4/batch |
3~4/batch |
|
21 |
Shipment |
Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR |
Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR |
Waste Tyre Pyrolysis Plant
Waste Tyre Pyrolysis Plant,Pyrolysis Plant ,Tyre Pyrolysis,Tyre Recycling
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com