Circulation Cold and Hot Water Transfer Pump

IR Circulation cold and hot water transfer pump

Description:
IR Circulation cold and hot water transfer pump is single-stage centrifugal pump especially designed and
manufctured by our company which based on the market requirement and introducing from abroad.
Circulation cold and hot water transfer pump through original impeller and modified impeller and cutting.
the pump is with full and broad.high efficiency.In the performance scope,according to consumers's needs,
may provide pump with any flow and head.

IR Circulation cold and hot water transfer pump

Description:
IR Circulation cold and hot water transfer pump is single-stage centrifugal pump especially designed and
manufctured by our company which based on the market requirement and introducing from abroad.
Circulation cold and hot water transfer pump through original impeller and modified impeller and cutting.
the pump is with full and broad.high efficiency.In the performance scope,according to consumers's needs,
may provide pump with any flow and head.

Open rubber and plastic mixing is the rubber factory used to prepare plastic rubber, rubber or hot refining, a type of roller exposed rubber refining machinery. This machine is suitable for EVA,rubber,synthetic rubber,hot melt and all kinds of chemistry raw material to mix ,mediate and disperse, and then put into the mass production. It is the best choice to test, make sample and learning in school. 

16inch automatic crusher mill

Advantage

1. The roller is made of chilled casting vanadium & titanium alloy iron which is hard    and wear-resisting, the surface hardness is above 70degree, the surface coating is about 15mm.

2. Hard tooth gear reducer with well-design structure, low noise, high efficiency and long    service life.

3. Self-aligning bearing is well matching with the bearing inside leakage-proof device.  The sealers are made of high temperature,wear, oil resistance material,which have very good sealing effect.

4. All main electrics are imported, the alternating current contactor is Shilin brand. The switch and button are Taiwan Tend brand.

5. Circulating lubrication system solves the oil leakage problem. The feature of this system is easy to maintain,easy to replace.

6. This machine is installed with overload protection device which protect the machine will not broken if the machine is overload. The machine will reverse 1/3 round when press the emergency stop button,which sure the production safety.

7. The [U" shape frame is whole set casting, but other factory welded together.

8. The machine base is welded by national standard I steel.

Main parameter

Name	A  Automatic crusher mill
Front roller diameter (mm)(Smooth roller)	400
Rear roler diameter (mm)(Groove roller)	450
Roller length(mm)	840
Front roller speed (m/min)	12.67
Speed ratio	1:1.63
Max roller gap(mm)	10
Nip adjustment	Manual
Mixing capacity(kg)	20
Power (kw)	45-8
Motor RPM(r/min)	740
Reducer ratio	45
Reducer model	315
Roller bearing diameter(mm)	260
Bearing mode	352952YA
Bearing size(mm)	360×260×150

 

Name	B mixing mill
(mm) Front roller diameter(smooth roller)	400
Rear roller diameter (mm)(smooth roller)	400
Roller length(mm)	840
Front roller working speed (m/min)	19.36
Speed ratio	1:1.5
Max roller gap(mm)	10
Nip adjustment	Manual
Mixing capacity(kg)	20
Power (kw)	37KW
Motor RPM(r/min)	980
Reducer ratio	45
Reducer model	315
Roller bearing diameter(mm)	260
Bearing model	352952YA
Bearing size(mm)	360×260×150

 

Mixing Mill Manchine

Mixing Mill Manchine,Open Mill,Rubber Mixing Mill,Roller Mill

SHIJIAZHUANG LONGXUAN TRADING CO., LTD , https://www.longxuanmachine.com