Summarize:
- Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Â Â Â Â pharmaceutical, and biotechnology.Â
- They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.
- These pumps offer a variety of lobe options including butterfly lobe, double lobe, triple lobe.
- Rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids.Â
Â
Product details:Â
| Working Principle: | Double rotors |
| Main Applications:       | Food applications, Polymers, Paper coatings, Soaps and surfactants, Paints and dyes Rubber and adhesives. |
| Driver: | Variable Speed Motor, Geared Motor, Variable Frequency Motor |
| Power Specs: | 220V, 240V, 380V, 400V, 415V, 440V, 460V,  50hz/60hz |
| Max.permissible fluid temperature: | 150°C (302°F) / 250°C (482°F)-water cool type |
| Type of connection: | Quick couple, Thread, Flange |
| Installation position: | Horizontal |
| Casing/Inner parts material: | Stainless Steel |
| Shaft seal type:  | Mechanical seal |
| Maximum viscosity: | 1x106 C.S.T |
| Maximum drive rating: | 22kW(30HP) |
| Maximum caliber:  | 125mm(5inch) |
| Maximum discharge-side pressure: | 5bar |
| Suction pressure: | 0.08Mpa(0.8bar) |
Â
Performance data:
| Type |
Size (mm) |
Discharge Capacity per 100r (L) |
Speed Range  (rpm) |
Flow (L/H) |
Motor Power  (kW) |
| LQ3A-6 | 25 | 6 | 200-500 | 650-1600 | 0.75 |
| LQ3A-8 | 32 | 8 | 200-500 | 850-2160 | 1.5 |
| LQ3A-12 | 38 | 12 | 200-500 | 1300-3200 | 2.2 |
| LQ3A-20 | 38 | 20 | 200-500 | 2100-5400 | 3 |
| LQ3A-30 | 42 | 30 | 200-400 | 3200-6400 | 4 |
| LQ3A-36 | 42 | 36 | 200-400 | 3800-7600 | 5.5 |
| LQ3A-52 | 50 | 52 | 200-400 | 5600-11000 | 5.5 |
| LQ3A-66 | 62 | 66 | 200-400 | 7100-14000 | 7.5 |
| LQ3A-78 | 75 | 78 | 200-400 | 9000-18000 | 7.5 |
| LQ3A-100 | 75 | 100 | 200-400 | 11000-22000 | 11 |
| LQ3A-135 | 100 | 135 | 200-400 | 15000-30000 | 15 |
| LQ3A-160 | 100 | 160 | 200-400 | 17000-34000 | 18.5 |
| LQ3A-200 | 125 | 200 | 200-400 | 21600-43000 | 22 |
Summarize:
- Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Â Â Â Â pharmaceutical, and biotechnology.Â
- They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.
- These pumps offer a variety of lobe options including butterfly lobe, double lobe, triple lobe.
- Rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids.Â
Â
Product details:Â
| Working Principle: | Double rotors |
| Main Applications:       | Food applications, Polymers, Paper coatings, Soaps and surfactants, Paints and dyes Rubber and adhesives. |
| Driver: | Variable Speed Motor, Geared Motor, Variable Frequency Motor |
| Power Specs: | 220V, 240V, 380V, 400V, 415V, 440V, 460V,  50hz/60hz |
| Max.permissible fluid temperature: | 150°C (302°F) / 250°C (482°F)-water cool type |
| Type of connection: | Quick couple, Thread, Flange |
| Installation position: | Horizontal |
| Casing/Inner parts material: | Stainless Steel |
| Shaft seal type:  | Mechanical seal |
| Maximum viscosity: | 1x106 C.S.T |
| Maximum drive rating: | 22kW(30HP) |
| Maximum caliber:  | 125mm(5inch) |
| Maximum discharge-side pressure: | 5bar |
| Suction pressure: | 0.08Mpa(0.8bar) |
Â
Performance data:
| Type |
Size (mm) |
Discharge Capacity per 100r (L) |
Speed Range  (rpm) |
Flow (L/H) |
Motor Power  (kW) |
| LQ3A-6 | 25 | 6 | 200-500 | 650-1600 | 0.75 |
| LQ3A-8 | 32 | 8 | 200-500 | 850-2160 | 1.5 |
| LQ3A-12 | 38 | 12 | 200-500 | 1300-3200 | 2.2 |
| LQ3A-20 | 38 | 20 | 200-500 | 2100-5400 | 3 |
| LQ3A-30 | 42 | 30 | 200-400 | 3200-6400 | 4 |
| LQ3A-36 | 42 | 36 | 200-400 | 3800-7600 | 5.5 |
| LQ3A-52 | 50 | 52 | 200-400 | 5600-11000 | 5.5 |
| LQ3A-66 | 62 | 66 | 200-400 | 7100-14000 | 7.5 |
| LQ3A-78 | 75 | 78 | 200-400 | 9000-18000 | 7.5 |
| LQ3A-100 | 75 | 100 | 200-400 | 11000-22000 | 11 |
| LQ3A-135 | 100 | 135 | 200-400 | 15000-30000 | 15 |
| LQ3A-160 | 100 | 160 | 200-400 | 17000-34000 | 18.5 |
| LQ3A-200 | 125 | 200 | 200-400 | 21600-43000 | 22 |
What is Feeder on the placement machine? What is Feida on the placement machine? Feida is the main accessory of the placement machine. Its function is to mount the SMD patch components on the feeder, and the feeder provides components for the placement machine for patching.
In the placement machine, the feeder functions to supply the chip component SMC/SMD to the placement head in a regular pattern and order for accurate and convenient pickup, which occupies a large number and position in the placement machine. It is also an important part of choosing a placement machine and arranging the placement process. Depending on the SMC/SMD package, feeders typically have a variety of tapes, sticks, waffles, and bulk materials.
Tape feeders with the different size such as 8mm, 16mm, 24mm, 32mm, 44mm, 56mm etc.Panasonic Feeder,Insertion Machine Tape Feeder Unit,Tape Feeder Unit,Feeder Panasonic
Shenzhen Keith Electronic Equipment Co., Ltd. , https://www.aismtks.com