LCD splicing screen common installation method

With the continuous maturity of liquid crystal technology, LCD splicing screens have gradually entered people's field of vision in recent years, and quickly seized the large screen splicing market, and DLP, LED has become the mainstream technology in the large screen splicing market. Although the LCD splicing screen is very popular, it is a commercial device after all, and people's understanding of it is very limited, which has great obstacles for everyone to purchase LCD splicing screen. In order to let everyone know more about the LCD splicing screen, Xiaobian will update the information related to the LCD splicing screen. Today we will talk about the four common installation methods of LCD splicing screens. LCD splicing screens can be installed in a variety of ways. Depending on the application, different installation methods can be used.

The most common installation methods are currently the following four:

Floor-standing cabinet installation

Floor-standing cabinet installation is made of all-steel, computer gray appearance, plus electrostatic protection, the whole system looks beautiful and atmospheric, and the system is relatively simple if it needs to move.

2. Wall mount installation

The wall-mounted bracket type installation is to fix the bracket to the wall with the expansion bolt first, then hang the splicing screen, and the debugging is good, the installation is simple and fast. However, if the number of splicing screens is relatively large, the wall may not be carried.

3. Embedded installation

The flush mount is to dig up the space on the wall and then trim the screen. The advantage is that it can be better integrated with the surrounding environment, which can save more space.

4. Vertical bracket installation

In the way of vertical bracket installation, the entire splicing screen system is supported by a bracket, which supports the weight of the entire system. This type of installation requires that the installed floor be flat, the floor is strong enough, and the requirements for the splicing bracket are high, so that the installation is beneficial to system maintenance and fault repair.

There are two common maintenance methods for LCD splicing screens:

1. External drag-and-drop front maintenance mode

Pre-maintenance generally takes the screen off in front of the large screen and then maintains it; there are two types of electric and manual; the large screen installation of this maintenance method is very complicated, and only two layers of large screen can be spliced ​​(recommended most At the same time, because it is necessary to leave a margin for removing the large screen from the front, the large screen seam will inevitably become larger, which will affect the display effect to some extent.

2. The post-maintenance mode of the maintenance access channel is reserved behind.

Post-maintenance refers to maintenance on the back side of the large screen. It is necessary to leave enough maintenance access on the back of the screen. Generally, it takes about 70 cm to 1 m wide. The requirements for the construction space are high, and will be to a certain extent. Compress the visible space. Most of the projects now use post-maintenance methods.