Under the new normal and new economy, how can China's manufacturing industry, which has been pinned high hopes, break out of the ranks and upgrade its quality? - On this issue, the 2nd China Made 2025 Summit Forum and the Top Ten Quality Awards Ceremony held in Beijing gave answers: from manufacturing to intelligence to quality.
This forum assembles many domestic economic and financial leaders, industry representatives, and well-known experts and representatives of exemplary companies. The role of the Chinese manufacturing industry in the economy, the problems faced by the transformation and upgrading, and the realization of the manufacturing to the wisdom and quality The possible ideas and paths for the construction of China's new manufacturing system were put forward and their respective opinions were put forward.
Member of National Strategy Committee for Manufacturing Powerful Country Construction, Deputy Director of the Ministry of Machinery Industry Lu Yanqi, Deputy Director of the State Development Research Center of the State Council Liu Shijin, Member of the National Strategy Committee for Manufacturing Powerful Countries, and Principal writer of “Made in China 2025†Qu Xianming, a well-known economist Xu Xiaonian attended the forum and delivered an important keynote speech.
Guests attending the forum include Ma Xiaohe, Deputy Dean of the Macroeconomic Research Institute of the National Development and Reform Commission and Director of the Industrial Economic Research Institute; Xu Jing, Director of the Intelligent Manufacturing Institute of the Huaxin Research Institute of the Ministry of Industry and Information; and Song Hua, Vice President of the Business School of Renmin University of China. And Jiang Xipei, chairman of the Board of Directors of Far East Holding; Wang Guangyu, Chairman of Huarui Capital; Chen Xuefeng, Vice President of Chery Jaguar Land Rover; and Yu Gang, President of Lifan Industry.
The forum also presented awards to the winners and individuals of the Top Ten Manufacturing Quality Awards in China in 2016, which provided references for the innovation and upgrading of Chinese manufacturing companies, and even set a benchmark.
Economic downturn forced the transformation and upgrading of the manufacturing industry
Liu Shijin, deputy director of the State Council Development Research Center, believes that the foundation of the entire national economy, especially the basis for competitiveness, is still manufacturing.
He said that China's economic downturn is a re-evaluation of transition, that is, from the high growth of about 10% in the past, to a medium-speed growth platform, which is a switch between two different platforms. Over the past six years, the Chinese economy has been in the process of switching. This process has not been completed, so there has been downward pressure.
In his view, the economic downturn has brought about intensified competition, resulting in differentiation, and finally there has been a transformation and upgrading. The recent division of companies, industries and regions is a very significant feature of the Chinese economy. In this way, some good companies have gradually come out, "so we still have to follow this trend instead of blocking this process."
In this process, Liu Shijin suggested that companies should do something wrong, concentrate their efforts on doing what they are best at, and upgrade their professionalism in order to achieve transformation and upgrading of the manufacturing industry.
How to realize this vision, Qu Xianming, who is a member of the National Strategy Committee for Manufacturing Powerful Countries and the main author of "Made in China 2025," naturally has a profound perception. His path is: smart manufacturing and industrial strength.
Qu Xianming stated that intelligent manufacturing is the main direction of China's manufacturing 2025, and is the core of a new round of scientific and technological revolutions and industrial changes. He believes that the development of a new generation of information technology and the urgent need for transformation and upgrading of China's manufacturing industry provide a very important means for China's manufacturing industry. This opportunity needs to be seized.
In his view, smart manufacturing will revolutionize China's manufacturing industry, bringing innovation in products and manufacturing technologies.
In addition, he also believes that because there are too many debts owed to the industrial base, China's manufacturing must change from strong to strong. To become high-quality manufacturing instead of low-quality manufacturing, the key is to solve basic components, materials, and processes. Only the link of industrial strength is really resolved. "There is hope for Chinese manufacturing."
Focusing on the plight and vitality existing in these Chinese manufacturing, the participating experts and business representatives also conducted specific discussions on the difficulties and innovations in the manufacturing transformation, the search for new industry outlets, confidence in the development of the manufacturing industry, policies, and prospects. The path to China's manufacturing companies and the entire manufacturing industry. For example, Song Hua, deputy dean of the School of Business of Renmin University of China, suggested that the strategic transformation of Chinese manufacturing companies lies in supply chain innovation.
Government and business development
Lu Yanlu is a member of the National Strategy Committee for Manufacturing Powerful Country Construction and a former Deputy Minister of Machinery Industry, and has a profound understanding of the development of Chinese manufacturing.
Lu Yanzheng said in his speech that we are using smart manufacturing to focus on intelligence, but it does not mean that it is our goal. “Our goal is quality, quality or brand.†Made in China 2025 is actually a quality country strategy. The drive for innovation begins with quality, enhances quality, and creates brands that have global competitiveness.
Under such circumstances, the main body of implementing the strategy of strengthening the country is the enterprise, and the powerful country must first strengthen the enterprise. However, there are still many unsuitable places in the form of the enterprise and the collaborative innovation of the industrial chain.
He believes that the development of China's vast SMEs needs more technical support. This is a way to strengthen the solution in the future. From manufacturing to intelligence and quality, it is a reference to the current situation.
The famous economist Xu Xiaonian also analyzed the problems facing China's manufacturing industry. He believes that the main challenge for China's manufacturing industry is that the overall level is low and convergence is common. The differentiation and core competitiveness of enterprises are not strong, making a considerable number of manufacturing companies currently in operational difficulties.
Xu Xiaonian said that in order to get out of this dilemma, it is necessary to earnestly implement the “three go†policies of de-capacity, destocking, and de-leverage, in accordance with the requirements of the Central Government, eliminate backward technologies and products, eliminate obsolete production capacity, and open up new market spaces. For the next stage of development to create a better environment.
This is followed by the upgrading of the manufacturing industry. Xu Xiaonian believes that this needs to be achieved through innovation. It is very important to clearly divide the boundaries of the market and the government and clarify their respective positioning. The government should pay attention to the basic theory research and basic technology development. The commercial application of technology is that the main body of innovation should always be the enterprise, mainly the private enterprise. "Innovation comes from the private enterprise and the market. This is intrinsic logic. â€
He also believes that as long as Chinese companies take action, as long as we let the market fully play its role, we believe that the upgrading of China's manufacturing industry is just around the corner.
As a matter of fact, many companies are actively reforming their innovations. While realizing their own transformation, they also push for the upgrading of China's manufacturing industry.
This forum assembles many domestic economic and financial leaders, industry representatives, and well-known experts and representatives of exemplary companies. The role of the Chinese manufacturing industry in the economy, the problems faced by the transformation and upgrading, and the realization of the manufacturing to the wisdom and quality The possible ideas and paths for the construction of China's new manufacturing system were put forward and their respective opinions were put forward.
Member of National Strategy Committee for Manufacturing Powerful Country Construction, Deputy Director of the Ministry of Machinery Industry Lu Yanqi, Deputy Director of the State Development Research Center of the State Council Liu Shijin, Member of the National Strategy Committee for Manufacturing Powerful Countries, and Principal writer of “Made in China 2025†Qu Xianming, a well-known economist Xu Xiaonian attended the forum and delivered an important keynote speech.
Guests attending the forum include Ma Xiaohe, Deputy Dean of the Macroeconomic Research Institute of the National Development and Reform Commission and Director of the Industrial Economic Research Institute; Xu Jing, Director of the Intelligent Manufacturing Institute of the Huaxin Research Institute of the Ministry of Industry and Information; and Song Hua, Vice President of the Business School of Renmin University of China. And Jiang Xipei, chairman of the Board of Directors of Far East Holding; Wang Guangyu, Chairman of Huarui Capital; Chen Xuefeng, Vice President of Chery Jaguar Land Rover; and Yu Gang, President of Lifan Industry.
The forum also presented awards to the winners and individuals of the Top Ten Manufacturing Quality Awards in China in 2016, which provided references for the innovation and upgrading of Chinese manufacturing companies, and even set a benchmark.
Economic downturn forced the transformation and upgrading of the manufacturing industry
Liu Shijin, deputy director of the State Council Development Research Center, believes that the foundation of the entire national economy, especially the basis for competitiveness, is still manufacturing.
He said that China's economic downturn is a re-evaluation of transition, that is, from the high growth of about 10% in the past, to a medium-speed growth platform, which is a switch between two different platforms. Over the past six years, the Chinese economy has been in the process of switching. This process has not been completed, so there has been downward pressure.
In his view, the economic downturn has brought about intensified competition, resulting in differentiation, and finally there has been a transformation and upgrading. The recent division of companies, industries and regions is a very significant feature of the Chinese economy. In this way, some good companies have gradually come out, "so we still have to follow this trend instead of blocking this process."
In this process, Liu Shijin suggested that companies should do something wrong, concentrate their efforts on doing what they are best at, and upgrade their professionalism in order to achieve transformation and upgrading of the manufacturing industry.
How to realize this vision, Qu Xianming, who is a member of the National Strategy Committee for Manufacturing Powerful Countries and the main author of "Made in China 2025," naturally has a profound perception. His path is: smart manufacturing and industrial strength.
Qu Xianming stated that intelligent manufacturing is the main direction of China's manufacturing 2025, and is the core of a new round of scientific and technological revolutions and industrial changes. He believes that the development of a new generation of information technology and the urgent need for transformation and upgrading of China's manufacturing industry provide a very important means for China's manufacturing industry. This opportunity needs to be seized.
In his view, smart manufacturing will revolutionize China's manufacturing industry, bringing innovation in products and manufacturing technologies.
In addition, he also believes that because there are too many debts owed to the industrial base, China's manufacturing must change from strong to strong. To become high-quality manufacturing instead of low-quality manufacturing, the key is to solve basic components, materials, and processes. Only the link of industrial strength is really resolved. "There is hope for Chinese manufacturing."
Focusing on the plight and vitality existing in these Chinese manufacturing, the participating experts and business representatives also conducted specific discussions on the difficulties and innovations in the manufacturing transformation, the search for new industry outlets, confidence in the development of the manufacturing industry, policies, and prospects. The path to China's manufacturing companies and the entire manufacturing industry. For example, Song Hua, deputy dean of the School of Business of Renmin University of China, suggested that the strategic transformation of Chinese manufacturing companies lies in supply chain innovation.
Government and business development
Lu Yanlu is a member of the National Strategy Committee for Manufacturing Powerful Country Construction and a former Deputy Minister of Machinery Industry, and has a profound understanding of the development of Chinese manufacturing.
Lu Yanzheng said in his speech that we are using smart manufacturing to focus on intelligence, but it does not mean that it is our goal. “Our goal is quality, quality or brand.†Made in China 2025 is actually a quality country strategy. The drive for innovation begins with quality, enhances quality, and creates brands that have global competitiveness.
Under such circumstances, the main body of implementing the strategy of strengthening the country is the enterprise, and the powerful country must first strengthen the enterprise. However, there are still many unsuitable places in the form of the enterprise and the collaborative innovation of the industrial chain.
He believes that the development of China's vast SMEs needs more technical support. This is a way to strengthen the solution in the future. From manufacturing to intelligence and quality, it is a reference to the current situation.
The famous economist Xu Xiaonian also analyzed the problems facing China's manufacturing industry. He believes that the main challenge for China's manufacturing industry is that the overall level is low and convergence is common. The differentiation and core competitiveness of enterprises are not strong, making a considerable number of manufacturing companies currently in operational difficulties.
Xu Xiaonian said that in order to get out of this dilemma, it is necessary to earnestly implement the “three go†policies of de-capacity, destocking, and de-leverage, in accordance with the requirements of the Central Government, eliminate backward technologies and products, eliminate obsolete production capacity, and open up new market spaces. For the next stage of development to create a better environment.
This is followed by the upgrading of the manufacturing industry. Xu Xiaonian believes that this needs to be achieved through innovation. It is very important to clearly divide the boundaries of the market and the government and clarify their respective positioning. The government should pay attention to the basic theory research and basic technology development. The commercial application of technology is that the main body of innovation should always be the enterprise, mainly the private enterprise. "Innovation comes from the private enterprise and the market. This is intrinsic logic. â€
He also believes that as long as Chinese companies take action, as long as we let the market fully play its role, we believe that the upgrading of China's manufacturing industry is just around the corner.
As a matter of fact, many companies are actively reforming their innovations. While realizing their own transformation, they also push for the upgrading of China's manufacturing industry.
Cutting Machine,Hydraulic Cutting Machine,Gold Cutting Laser Machine,Steel Cutting Machine Laser
HT-Metalforming Equipment Manufacturing Co.,Ltd , https://www.htmetalforming.com