Self-Priming Electric Pump with Micro Cp for Car Washing

      Self-priming Electric Pump with Micro CP  for Car Washing

Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel

Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> AISI 304 shaft or 45# carbon steel

Working Range
>> Liquid: clean liquids without  suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44

Application
>> Household Water Supply
>> Water Supply System
>> Cooling System
>> Boost System

Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time. 
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>> The flow priority system, electric pump use acme, turely achieve the full pressure. 

KJ-A SERIES INTELLIGENT WATER PUMPS ------FOR COLD AND HOT WATER
1. Self-priming: For the first time using, the entire pump chamber should be filled with water. 
2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stop working.                                                
3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor. 
Besides, thermal protector in motor will interrupt current when motor overheats.

                                                                  

                                                  About us
     Fujian Gordon Pump Industry Co., Ltd is located in Fu'an City, where is the capital of small appliances. Gordon is our own brand, which tends to go up in the peer. Our company has a strong technical management team. We Actively promote the automatic process. Our goal is to do a first-class pump manufacturing enterprises.




FAQ       Self-priming Electric Pump with Micro CP  for Car Washing

Pump
>> Pump Body: cast iron & support under special anti-rust treatment
>> Impeller: stainless steel impeller, brass impeller, ppo impeller
>> Mechnical Seal: carbon / ceramic / Stainless Steel

Motor
>> Bulit-in thermal protector for single phase motor
>> Motor with copper winding
>> Motor Housing: Steel-plate, Aluminum alloy
>> C&U bearing
>> AISI 304 shaft or 45# carbon steel

Working Range
>> Liquid: clean liquids without  suspended solids, non-aggressive
>> Liquid temperature: -10ºC and +100ºC
>> Ambient temperature up to +40ºC
>> Max. working pressure 10 bar
>> Continous service S1
>> Insulation: B
>> Protection: IP44

Application
>> Household Water Supply
>> Water Supply System
>> Cooling System
>> Boost System

Advantages
>> Electronic pressure switch controlled by PC clip to avoid take off pressure switch frequently.
>> Every 72h it will start for 10s in order to avoid pump locked if long time no using pump.
>> Water protection system to avoid the pump in the anhydrous state for a long time. 
>> Delay 3s start to avoid spark-over socket, protect the personal safety.
>> The flow priority system, electric pump use acme, turely achieve the full pressure. 

KJ-A SERIES INTELLIGENT WATER PUMPS ------FOR COLD AND HOT WATER
1. Self-priming: For the first time using, the entire pump chamber should be filled with water. 
2. Automatic: It is powered on or off by automatic system: turn on the tap the pump works, and turn off the tap the pump stop working.                                                
3. Booster: Stable and powerful pressure is controlled by pressure sensor and flow sensor. 
Besides, thermal protector in motor will interrupt current when motor overheats.

                                                                  

                                                  About us
     Fujian Gordon Pump Industry Co., Ltd is located in Fu'an City, where is the capital of small appliances. Gordon is our own brand, which tends to go up in the peer. Our company has a strong technical management team. We Actively promote the automatic process. Our goal is to do a first-class pump manufacturing enterprises.




FAQ

Multi-component Injection Molding Machine

Injection Blow Molding Machine,Injection Mould,Asthma Home Treatment ,Medical Restraints

Shen Zhou Machinery Co., Ltd. , http://www.szmouldmachine.com