One million kilometers of engine is not overhauled? Yes, you are not mistaken, for Cummins heavy-duty engines , to reach a million kilometers without major repair is not a myth, and the country has gradually appeared to reach millions of kilometers without major repair users. Among them, Xinjiang user Jiang Zhenhui is a new member of the Cummins Million Kilometer Club.
Heavy trucks with 1 million kilometers of Cummins engine without major repairs
Jiang Zhenhui, who has more than ten years of driving experience, is most familiar with trucks. The natural brands of trucks he has driven are many. At present, the longest used is a Shanxi Auto DeLong tractor equipped with Cummins ISM engine installed in Xi'an Cummins. Although Shaanxi Automobile Delong is very common in the local area, when Jiang Zhenhui purchased the car, there were not many users of this engine.
Million kilometers Cummins engine without major repair
"As for the many coal pulled in Xinjiang, we took Hami's terms. The large trucks that previously used dozens of tons or even hundreds of tons of coal to pull coal can be seen everywhere. Of course, overloads and overloads are strictly checked. The state has regulations and everyone transports them. According to the previous standard, to buy a car, you have to look at the truck's chassis and engine.†Jiang Zhenhui said that when the time to buy was mainly the bearing capacity of the truck, he did not expect the engine to give him more surprises.
Million kilometers of Cummins engine dismantling parts without major repairs
Jiang Zhenhui started as a person at the beginning of transportation. As time went on, he became more and more skilled in transportation. The inside lane became more and more clear, and he gradually developed into a current transportation fleet. He currently owns 5 transport vehicles, of which 2 are equipped. Cummins ISM engine. As Jiang Zhenhui expects, the carrying capacity of trucks will be no problem at all. Coupled with the engine's “ultra-expected play,†Jiang Zhenhui’s transportation business is booming. "This engine is too sturdy. No major repairs have been done so far." Talking about the Cummins engine, Jiang Zhenhui used the word "pimple" which was the most grounded gas to describe.
Technician Performs Cummins Engine Parts Inspection Without Million Kilometer
Jiang Zhenhui's transportation team mainly set off from Hami to Zhejiang, Guangzhou, and other places, and sent out the local specialty products in Xinjiang, and came back with department store transportation. Nearly a few thousand kilometers away from Hami to Guangzhou, basically it takes 12 days to transport it once. "A car can transport up to 2.5 miles a month, and the three-inch time is too tight to catch up. In this way, after about six years, the Cummins ISM engine has already reached 1 million kilometers." Happy.
As the "heart" of the truck, the engine is undoubtedly the most concerned part of every user. The vitality of the heart is directly related to the service life of the truck. Jiang Zhenhui can be said to care for "old folks." "The quality of the Cummins ISM engine is really good, not bad, usually regular service stations to do maintenance, this is very important. And now the road conditions are good, the entire high-speed, open up absolutely no problem." Jiang Zhenhui said.
In Xinjiang, there are many people who do transportation like Jiang Zhenhui. Everyone has a large or small transportation fleet. Although the truck brands are different, everyone is paying more attention to the comprehensive use cost of the vehicles instead of just considering the one-time purchase. Cost. "The transportation was not done well in the past two years. Compared with last year, it was down by 12%. Therefore, transportation costs have to be well controlled." Without any overhaul of the engine, Jiang Zhenhui has saved a lot of maintenance costs, and it is not ineffective. The engine ensures that the vehicle can always run on the road and the transportation efficiency is improved. Of course, the money is earned.
Dealing with trucks has become a part of Jiang Zhenhui's life. Every day, people watch the vehicles carrying goods out of and out of them, directing the teams that travel through Xinjiang, Zhejiang, and even Guangdong. His heart is full of happiness. One person, a few cars, and a million-kilometer Cummins engine without major repairs, have connected Jiang Zhenhui's dream of transportation!
Buy truck parts, on the Taobao stalls, multiple discounts waiting for you to take!Http://NewDrain.html
Machining Stainless steel is the use of CNC machining out, including drilling, boring, cutting, turning, screw, etc.. Machining stainless steel commonly used materials: sus303304316.stainless steel has a very high hardness after machining, easy deformation, so in the process of rough machining to eliminate stress, and then finished. Surface treatment is generally passivation, we have specialized laboratories to test products, and ensure that each size to meet the requirements of the drawings, including the machining stainless steel application in various industries: automobile, ship, crane, medical equipment, industrial automation equipment.
Of course,we also accept the custom machining,welcome to contact us.
Machining Stainless Steel,High Precision Machining Stainless Steel,Cnc Machining Stainless Steel,Stainless Steel Machining,Steel Machining
Hong Kong RYH CO., LTD , https://www.szcncmachiningparts.com