Maz Weichai Company held formal production and batch delivery ceremony 
Speech by Belarusian Prime Minister Lumas In his speech, Lumas pointed out that the Maz Weichai joint venture project has received great attention from the heads of state of China and Belarus. I am very satisfied that this project is completed and put into production as promised, and the two sides are actively exploring further expansion of cooperation.
Speech by Ling Wen, Academician of the Chinese Academy of Engineering and Vice Governor of Shandong Province
In his speech, Ling Wen expressed his affirmation of the "China Speed", "Shandong Speed" and "Weichai Speed" for the Maz Weichai project. I hope that Maz Weichai will follow the requirements of the "One Belt, One Road" initiative and follow the requirements of the two heads of state. It has become the best project in the Zhongbai Industrial Park and has become a model of cooperation between China and Belarus in mutual benefit and win-win, which has injected new impetus into the economies of the two countries.
Tan Xuguang, Chairman of Weichai Group, delivered a speech
Tan Xuguang said that the official launch of Maz Weichai Company means that the two sides have entered a new period of development. Weichai will unswervingly promote the localization process, expand cooperation space, and build the Mazhai Chai project into a “Belt and Road†project. Bright business card on.
On September 29, 2016, under the joint witness of Chinese President Xi Jinping and Belarusian President Lukashenko, Weichai Power and the Ministry of Industry of Belarus signed the "China Weichai Power and the Belarusian Maz Group in the Republic of Belarus" in the Great Hall of the People. Memorandum of cooperation in the production of engines. The two parties will establish a joint venture company in the Belarusian China-Belarus Industrial Park to produce weichai engines.
On September 13, 2017, under the witness of the then Prime Minister of Belarus and Governor Gong Zheng of Shandong Province, Weichai signed a cooperation agreement with Maz Group and held a groundbreaking ceremony for the new factory, officially entering the “Big Stone†industry in China and Belarus. garden. After that, the project team rushed to race against time. The snow-covered winter surveyed the factory buildings and design factories in the original forest. When the spring ground was not melted, Maz Weichai took the lead in the Zhongbai Industrial Park. The project team overcame many difficulties and completed the construction of the factory in only seven and a half months. It created the miracle of the construction of Belarusian engineering with “China Speed†and “Chopping Speed ​​of Weichaiâ€, and became the first in the Zhongbai Industrial Park to be started in the same year. enterprise. On November 18, 2018, Maz Weichai Company held a trial production ceremony and the factory entered the trial production stage.
Maz Weichai's 1000th off-line engine unveiled
The Maz Weichai factory adheres to high standards and high quality construction. Since the trial production, it has obtained the identification of ecological environment protection, fire safety and building quality in Belarus. On October 1, 2019, it obtained the Belarusian operation permit, marking the comprehensive construction of the factory. carry out. Maz Weichai produces engines that meet Euro IV and Euro V emissions, with an annual production capacity of 20,000 units. The diesel engines and gas engines that have been produced have obtained the European V emission certification and the EAC certification of the Russian, White and Kazakhstan Customs Union. And became the first industrial park to pass the ISO9001 quality system certification. Products are widely used in trucks, buses, construction machinery and agricultural equipment, not only to meet the Maz Group's support, product sales will also cover Belarus, Russia, Ukraine and other CIS countries. Weichai also cooperated with the Minsk Automotive Engineering Institute to establish an engine powertrain training center in the local area to train local vocational and technical personnel according to the Weichai standard.
Reading volume: Source: Weichai Author: LOOContinuous Waste Plastic Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 25-40 tons.
Flow-chat of Continuous Waste Plastic Pyrolysis Plant
Advantages of Continuous Waste Plastic Pyrolysis Plant
1. Large daily capacity of 25 MT raw materials, and can work 24 hours without any stop for 15-20 days;
2. Auto-loading, auto-discharging and oil coming out at the same time;
3. Only need fuel for the beginning 2-3 hours, then the sync gas generates itself is enough to support heating, saving fuel cost;
4. Low requirement on the raw materials, no need tiny granule, 5cm pieces acceptable for smooth running;
5. High efficiency condensers, more oil output, good quality oil, easy to clean.
6. Sync gas recycling system, fully burned after recycling and utilization, preventing pollution and saving fuel cost.
7. National patent smoke scrubber, can efficient remove the acid gas and dust of the smoke, environmental friendly to meet related national standards.
8. Easy to operate, need less manpower.
Technical Parameter of Continuous Waste Plastic Pyrolysis Plant
|
NO. |
ITEM |
Technical Parameter |
|
1 |
Suitable Raw Materials |
Small pieces of Waste tyre,rubber, waste plastic≤5cm |
|
2 |
Operating Mode |
Fully Continuous Operation |
|
3 |
Structure |
Horizontal Type Revolve |
|
4 |
Loading and discharging |
Fully Automatic Feeding and Discharging under High Temperature at Same Time |
|
5 |
Capacity(24h) |
8-20Mt |
|
6 |
Work Pressure |
Slightly Negative Pressure |
|
7 |
Oil Yield of tyres |
40%-45% |
|
8 |
Reactor Rotational Speed |
1R/M |
|
9 |
Installation Power |
110kw |
|
10 |
Cooling Method |
Cycle water |
|
11 |
Type of Drive |
Sprocket Wheel |
|
12 |
Heating Method |
Hot Air |
|
13 |
Noise dB(A) |
≤85 |
|
14 |
Main Reactor Weight (MT) |
About 20Mt |
|
15 |
Total Weight(MT) |
About 45Mt |
|
16 |
Installation Space Required |
60m*20m |
|
17 |
Manpower |
2/shift |
|
18 |
Shipment |
5*40HC |
|
19 |
Delivery time |
≤70Days |
Continuous Waste Plastic Pyrolysis Plant
Continuous Waste Plastic Pyrolysis Plant,Continuous Plastic Pyrolysis Plant,Plastic Pyrolysis Plant
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclings.nl