Airport Baggage Cart with Canopy Waterproof for Aviation

2 T Steel Airport Baggage Cart with Canopy for Aviation

Product Description
1. It is suitable for baggage, wrap and bulk cargo. Since there is a fixed canopy and side sliding waterproof material, it is widely accepted by those countries which have heavy rainfall,
2. The tow bar can pull 5 units behind and applies brake when it is below the horizon.
3. The turn table steering enable the unit has a minimum turning radius of less than 3.5 meters.
4. Durable solid tire.
5. In the rear, there is a fool proof hitch which prevents any detachment towing behind.
6. The working platform can be of steel plate or checker plate, depending on customer's requirements.
7. Loading mode: Both side.

Technical Specification
1. Overall dimension: 3680 mm L x 1500 mm W x 1800 mm H
2. Platform dimension: 3000 mm L x 1500 mm W
3. Height of working platform: 560 mm
4. Tire size: 16 x 5 9
5. Loading capacity: 2000 kg
6. Speed: 25 km/h
Main Component Material
1. Frame: #8 standard channel steel
2. Side wall: 2 mm steel plate and 40 x 3 mm square tube
3. Canopy: 1.5 mm steel plate
4. Working platform: 3 mm steel plate
5. Frames full paint

Vision Localization/CCD Series

UTECH Vision Localization/CCD Series include Laser Machine with CCD, Cnc Router With CCD, Laser plotter with CCD, Oscillating Knife Cutter With CCD, etc.

Visual inspection is widely used in industrial manufacturing product assembly and quality inspection. According to customer needs, the whole package generally includes the following parts:
A. Camera (take picture) selection According to customer needs, choose different models of camera
B. Lens (with camera) select different focal lengths according to product size and object distance
C. Light source (the part that needs to be detected when the light is filled and illuminated)
D. Software (analytical program)
E. Industrial computer (running detection software and input and output)
F. Output part (IO control card, serial port, network port)

Performance characteristics:

• Support for custom AOI, lower resolution to increase frame rate.
• Gain, exposure time and white balance programmable settings.
• Three working modes: continuous acquisition / soft trigger acquisition / external trigger acquisition.
• Support for exposure completion event notification.
• Output flash sync signal for precise synchronization of exposure and fill light.
• Support adjustment of packet length and packet interval, optimize multi-machine simultaneous acquisition and transmission.
• Support for lookup table, parameter group function.
• Provide color correction to improve the color reproduction of captured images.
• Rugged all-metal housing and cable locking device.
• Support single cable transmission up to 100 meters.
• Supports GENICAM and GIGE VISION for direct connection to third-party software such as HALCON and LABVIEW.

Vision Localization/CCD Series

Vision Localization,Vision CNC Digital Cutting System,Vision CCd,Vision Camera

Shandong U-May CNC Technology Co., Ltd. , https://www.sesamecnc.com