The magnetic flap level gauge is a kind of liquid level measuring device with simple structure, direct observation and easy installation. Its unique advantages are more and more appreciated by people. Its type also increases with the application range, according to the installation. The location can be divided into side-mounted and top-mounted, according to their different materials can be divided into anti-corrosion type and ordinary type, according to their different functions, can be divided into with remote and without remote transmission, according to the measurement medium Different conditions of temperature and pressure can be divided into high pressure type and high temperature type. The side-mounted installation method is the most common installation method we have seen. According to the comprehensive consideration of various aspects, the side-mounted magnetic flap liquid level gauge has a certain degree of measurement of edible oil compared to other level gauge products. The advantages. Why do you say so, the specific reasons are as follows:
1. Side-mounted magnetic flap level gauges are available in a variety of materials, while the ducted portion of the side-mounted magnetic flap level gauge is made of stainless steel to meet the high demands of food grades.
2, side-mounted magnetic flap level gauge pure mechanical principle, safe, stable, reliable, intuitive display.
3, can increase the remote transmission device for the side mounted magnetic flap level gauge, 4-20MA signal output, the signal is transmitted to the control room.
4, increase the upper and lower limit alarm switch and connect the pump valve, so that the side mounted magnetic flap level gauge to achieve the control of the level of the liquid level in the container.
5. For some large-scale edible oil storage tanks, side-mounted magnetic flap liquid level gauges can also be used. Although the cost will be a little higher, the side-mounted magnetic flap liquid is a relative one for radar level gauges or ultrasonic level gauges. The meter is more accurate and reliable. At present, although the manufacturing process of radar level gauges and ultrasonic level gauges in China is very mature, false positives occur occasionally.
These are the advantages of the side-mounted magnetic flap liquid level gauge used in the edible oil processing industry. The side-mounted magnetic flaps are used in a series of links such as edible oil raw material storage tanks, semi-finished product storage, and filling workshops. Level gauge.
With regard to the repair and maintenance of side-mounted magnetic flap level gauges, we need to pay attention to the following points and methods:
1. Prepare for routine maintenance and maintenance of side-mounted magnetic flap level gauges, generally with daily maintenance and weekly maintenance, also known as daily insurance and weekly warranty.
2. When cleaning, first open the cap of the iron tube of the water level gauge of the level gauge, carefully take out the level gauge and then clean up the mechanical equipment engineers around the equipment such as chips, debris, and dirt.
3, side-mounted magnetic flap level gauge to be placed neatly, pipelines, lines should be organized; good lubrication on time oil or oil change, continuous oil, no dry friction phenomenon, normal oil pressure, bright oil standard, oil flow, oil In accordance with the requirements of the liquid level gauge, oil guns, oil cups, and linoleum are cleaned; trichloroethylene or alcohol can also be used to inject the pressure-reducing holes into the height of one-half of the soak for about 5 minutes, and then slightly shaken and repeated several times. Until the cleaning stops. It is forbidden to use any appliance to clean the pressure-inducing hole so as not to damage the sensitive core pressure-sensitive diaphragm.
4. Clean the height of the inner medium level of the side-mounted magnetic flap level gauge. Avoid using excessively hard brushes or metal tools to avoid damaging the sensitive core and the pressure interface threads.
5, after the cleaning is completed, the level gauge is slowly put back into the iron pipe, the lower part of the iron pipe is felt to be placed, and the cap can be installed back to the original place, and the level gauge after cleaning and cleaning is reinstalled. The water level at the same level of the sluice should be compared again to correct the detection value of the secondary instrument to ensure the correctness of the sampled data.
6. The side mounted magnetic flap level gauge should be cleaned once a week.
Runzhong Instrument Technology Co., Ltd. specializes in the manufacture of magnetic flap level gauge instrument products for many years, and has more guarantees in the selection of materials and product quality than their counterparts, if you need more side-mounted magnetic flap level gauges For related technical parameters or experience, please visit our website. For the selection of side-mounted magnetic flap level gauges, please contact our customer service staff. We will provide you with professional and high-quality services.
* Different material of the liquid end to meet of different liquid.
* Double or Triple pump heads are available.
* Liquid temperature range is not over than 250 degree.
*The pressure up tp 50Mpa
* The capacity flow up to 200L/H
*The flow can be adjusted from 0-100% while it's running or stopped.
Alloy Pump Head Plunger Metering Pump
Alloy Pump Head Plunger Metering Pump,Widely Used Alloy Pump Head Plunger Metering Pump,Big Alloy Pump Head Plunger Metering Pump,Small Alloy Pump Head Plunger Metering Pump
Zhejiang Ailipu Technology Co., LTD. , http://www.alipu.com