Correct use of brakes
The brake system is often supplemented with lubricating oil, which is well known to the majority of vehicle owners. On the other hand, for the brake fluid, many vehicle owners often buy new vehicles until the vehicles are damaged and have not been replaced. What is the effect of this approach? ?
Brake fluid is commonly referred to as brake oil and is used to transmit the brake power of the owner to the vehicle brake. If the brake oil is dirty (because the brake fluid moves back and forth in the brake pipe, the metal powder of the brake master cylinder and the cylinder pump will seep into the brake fluid, and after a while, it will produce impurities such as sludge), and the viscosity will increase. Will directly affect the braking force of the vehicle, the specific performance for the owner feel brake "soft", so the owner for every 2 to 40,000 kilometers, you must replace the brake oil.
Do not ignore uneven wear of brake pads
Part of the braking system that needs regular attention is the consumable brake pad in addition to the brake fluid. When the vehicle is running, the sand on the road is often involved in the brake system, high-speed impact brake pads, causing uneven wear of the brake pads. The specific performance is that if it happens in the front wheel, the vehicle will shake when the driver brakes; if it is the rear wheel, when the vehicle owner brakes, he feels that the braking power is insufficient and the system is unresponsive. Therefore, the owner should regularly check the degree of wear of the brake pads, whether the thickness meets the safety standards and whether the surface is uniform.
Get rid of bad driving habits
Finally, the daily bad driving habits of owners, especially some new owners, will accelerate the loss of the braking system. For example, after the brake, the foot is still placed on the brake pedal instead of pulling the handbrake. At this time, the brake master cylinder is in a high pressure state for a long time, and wear between the cylinder pump and the piston of the master cylinder is increased, resulting in leakage. Pressure, which affects the braking function of the vehicle.
C/Z/U Purlin Changeable Roll Forming Machine
C/Z/U purlin forming machine(c/z/u roll forming machine) is used color- coated steel, cold - formed by rolling into a variety wave plates, light weight, high strength. According to customers requirements, it is divided into fully automatic, semi-automatic and manual, suitable industrial and civil buildings, warehouses, special constructions, have light weight, high strength, convenient to operate, long working time advantages.
Specifications:
Matching material
Steel coil, Galvanized, PPGI, Aluminum
Material thickness range
According to drawings
Main motor power
15KW
Forming speed
6-8m/min (include punching and cutting time)
Hydraulic power
5.5KW
Quantity of rollers
About 18
Shaft diameter and material
70mm, material is 40Cr
Material of rollers
45# steel with chromed
Way of driven
chain transmission
Controlling system
PLC
Voltage
380V/30Phase/50Hz
Total weight
About 10 tons
Size of the machine
L*W*H 10m*1.2m*1.6m
Working process:
Pictures for machine:
Training and Installation :
1. We offer installation service local in paid, reasonable charge.
2. QT test is welcome and professional.
3. manual and using guide is optional if no visiting and no installation.
Certification and after service:
1. Match the technology standard, ISO producing certification
2. CE certification
3. 12 months warranty since the delivery. Board.
Our advantages:
1. Short delivery period.
2. Effective communication
3. Interface customized.
C/Z/U Purlin Making Machine,C/Z/U Purlin Roll Forming Machine,C/Z/U Steel Frame Making Machine,C/Z/U Roll Forming Machine
YingYee Machinery and Technology Service Co.,Ltd , https://www.yingyee.cn