Mainly used in electric power systems, industrial and mining enterprises with the power load requirements and the power grid electrical isolation of the field cooperation power supply, the city power for the magnetic power, as a precision measurement test system purification (anti-jamming) power supply and power grid isolation device.
Mainly used in electric power systems, industrial and mining enterprises with the power load requirements and the power grid electrical isolation of the field cooperation power supply, the city power for the magnetic power, as a precision measurement test system purification (anti-jamming) power supply and power grid isolation device.
Isolation transformers: HRGB(D)/(S) single-phase/three-phase products sub-oil immersed and dry
Output (in / out) voltage: (D) 220V (380V) two-wire system, (S) 380V
Isolation voltage: 3KV, 5KV, 10KV,
No-load current: <5%
Impedance voltage: <7%
Potential isolation: single and double shield
Isolation transformer
Special standard: 50KV, 100KV, 200KV, 300KV, 500KV, 700KV, 1000KV (can be set freely).
HRGB (G) input and output for high voltage: 1KV, 2KV, 3KV, 5KV, 10KV-100KV...
Capacity: 0-5, 10, 15, 20, 30, 50, 100-1000KVA...
Rectifier Transformer:HRZB(D)/(S)
Capacity: 5-1000KVA...
Range of application: isolation
Rated power: 50/60 (KVA)
Efficiency (η): 98%
Voltage ratio: 400/220(V)
Shape structure: vertical
Cooling method: natural cold
Moisture protection: open
Number of windings: double winding
Iron core structure: heart type
Cooling form: dry
Iron core shape: ladder type
Frequency characteristics: low frequency
The input and output voltages and capacities are determined by the user's needs. The products are subdivided into oil-immersed and dry-type.
Their rollers and the outer wheels are arranged in a right angle intersecting intersecting. They can bear the load from all directions at the same time (such as axial, thrust or momentum hormones, etc.). Because of the linear contact between the roller and the track surface, the possibility of the axis to bear the load and the elastic deformation is very small. This type of bearing is widely used in industrial robots, working machines and medical facilities. It needs high rigidity, high speed and high speed to ensure precise occasions.
In cross roller bearings, cylindrical rollers are perpendicular to each other through spacer retainers on the top, so 1 cross roller bearings can bear all loads of radial load, axial load and torque load. Ring size is the minimum limit of miniaturization, especially very thin type is small size close to the limit, and has high rigidity, so the most suitable for use in industrial robot joint or rotating parts, machining center machine rotary table, hand rotating parts, precision rotary table, medical machine, metering device, IC manufacturing equipment etc.
1. Excellent rotation accuracy
The inner structure of the Cross Roller Bearing is arranged in 90 degrees perpendicular to each other by the roller.
The roller is equipped with a spacer or isolation block between the rollers to prevent the rolling of the rollers from being examined each other. In addition, the phenomenon of roller contact or locking will not occur. At the same time, because the inner and outer ring is a segmented structure, the clearance can be adjusted, even if the preload is applied, high accuracy rotation motion can also be achieved.
2. Simplification of operation and installation
The outer ring or inner ring, which is divided into 2 parts, is fixed together after loading the roller and the holder, so the operation is very simple.
3. Bear large axial and radial load
The roller is arranged vertically through the spacer retainer on a 90 degree V groove rolling surface.
4. Greatly save the installation space
The size of the inner and outer ring cross Roller Bearing is miniature minimal, especially ultra-thin structure is small size close to the limit, and has high rigidity, so the most suitable for industrial robot joints or rotating parts, machining center of the rotary table, the robot rotating parts, precision rotary table, medical instrument IC, measuring equipment, manufacturing device widely used.
5. high speed ability
6. reducing shaft length and machining cost, thermal expansion leads to a limited change in geometric size.
7. the nylon separator is used, the moment of inertia is low, the starting torque is low, and the angle degree is easy to control.
8. optimization of pretightening force, large rigidity, high precision of guiding roller
9. carbon steel provides excellent impact resistance and surface abrasion resistance
10. simple but fully lubricated
Crb Bearing,Cross Roller Slewing Bearing,Crb Turntable Slewing Bearing,Cross Roller Slewing Bearing Crb
LUOYANG AUTO BEARING CO.,LTD , https://www.lyautobearing.com