In this chapter, we will continue to explain the contents of the hazard source management system and accident hazard investigation and rectification system.
(1) Hazard source management system
In order to better implement the safety production policy of “safety first, prevention first, comprehensive managementâ€, effectively control the potential major risk factors of accidents in the workplace and production and construction, and prevent serious accidents. This system is specially formulated to ensure the safety of life and property of the people around the mine, to not affect the surrounding environmental protection, the safety and health of employees, and the smooth progress of production and construction of enterprises. Major hazards refer to high and steep slopes, step heights exceeding the requirements of the regulations, large-scale landslides, other dangers that endanger the safety of the surrounding areas, and potential locations where potential accidents may occur. Special monitoring, monitoring and management accounts should be set up for major hazards.
(II) The investigation and rectification system of hidden dangers
Safety inspection work must be regularized, institutionalized, and standardized. Through continuous inspection, it is especially important to find out and eliminate various hidden dangers in time, and eliminate accidents in the bud, in order to achieve long-term safe production, especially on-site safety inspection.
1. The safety inspection of the mine safety agency shall be carried out by the on-site inspection.
2. The production team should conduct safety inspection every day.
3. Regular security checks. Mine safety agencies should conduct regular safety inspections from time to time. Leaders, production management personnel, and engineering and technical personnel at all levels must check safety at the same time.
4. Contents of the safety inspection: Check the hidden dangers of the accident, check whether the site safety management is in place, and check whether there is a “three violations†phenomenon.
5. Regardless of the form of safety inspection, once the violation is found, it should be stopped in time, and hidden dangers should be eliminated in time and rectified within a time limit. The rectification of hidden dangers should be carried out by the principle of "three guarantees and four no pushes": the three rules are fixed personnel, fixed time, and fixed measures. The rectification is not pushed to the team, the team can be rectified and not pushed to the workshop, the workshop can be rectified and not pushed to the mining department, and the refinement of the mine department is not pushed to the superior department.
6. The mine safety agency shall establish a hidden trouble rectification account, and the workshop shall also establish a safety control point management, and the hidden dangers shall be rectified.
7. On-site safety inspection, the inspection personnel must carefully fill out the inspection form or record, and immediately identify the hidden dangers, and immediately organize the personnel to carry out rectification. If it cannot be rectified, it must immediately report to the relevant management decision-making body step by step, carry out rectification of hidden dangers, and designate personnel to Hidden source points are monitored.
This series of gearless traction machines has unique small and long design. The traction sheaves are cantilever-mounted. Unique design allows easy installation and removal of traction sheaves.
The stator core is unique laminated core design without a seat, so the machine weight and cost are reduced.
The traction machine has shaft brake with spline fit. So the machine is exquisite, compact and small, and has better performance. This type of traction machines can fully meet small machine room and non machine room elevators and effectively save the space.
Accessories made by well-known international manufacturers and imported sealed bearings are used in the traction machine, which avoids grease change and maintenance, so perfect quality is ensured.
Elevator Traction Motor
Elevator Traction Motor, Elevator Motor, Traction Electric Motor, Gearless Elevator Motor
Ningbo Xinda Elevator Traction Technology Co., Ltd. , https://www.xinda-elevator.com