On December 3, the data released by the Central Commission for Discipline Inspection showed that in October, all provinces and municipalities investigated and dealt with 2,386 violations of the “eight regulationsâ€; a total of 3,034 were handled, and 898 were given to the party and government. Among them, the number of violations of bus use accounted for 31.7% of the total number of investigations, accounting for the largest proportion.
In March, July and September this year, the Central Commission for Discipline Inspection reported a total of 22 typical problems that violated the eight regulations. Since September, the Central Discipline Inspection Commission has established a monthly report system, which publishes monthly summary reports of violations of the “eight regulations†by provinces and municipalities, and violates regulations, public funds and public drinks, bus problems, public funds and domestic The situation of overseas travel, the investigation and handling of six specific issues of big-scale wedding and funeral celebrations were reported to the public.
According to the summary table in October, as of October 31, all provinces and cities across the country investigated and dealt with more than 17,000 mental problems in violation of the eight central regulations, handling more than 19,000 people, and giving 4,675 people to the party and government. Among them, there are 15 cadres in the department, and the proportion of cadres at the township level is the largest, nearly 93.3%.
As far as October is concerned, the number of problems investigated and handled was 2,386, an increase of 8.9% compared with September; the number of people handled was 3,034, and the number of party and government disciplinary actions was 8,98, an increase of 29.9% and 21.2% respectively from September. It shows that the investigation of the "eight regulations" is still in a high pressure situation.
Judging from the types of investigations, the problem of bus use violations remained the biggest in October: 757 cases were investigated, accounting for 31.7% of the total number of investigations; secondly, 211 cases of weddings and funerals were held, accounting for 8.8%; 98 cases of drinking, accounting for 4.1%.
The number of violations of regulations, public funds and outbound tourism in the halls was not more than 50.
"The most important thing for officials in the "three public" is the bus. The key is that the officials have a weak sense of consciousness. They think that it is not illegal to use the bus, and the law does not blame the public." The Standing Committee of the Political Consultative Conference of Hubei Province and the expert who has long been concerned about bus reform Ye Qing on the "First Financial Daily" The reporter said, "This is also the reason that the "eight regulations" were promulgated for nearly a year, and the investigation of bus problems has always accounted for about one-third of the total."
Despite the serious problem of bus violations, the number of violations of bus use in October decreased by 179 from September, a decrease of nearly 19.1%.
Ye Qing believes that "the reduction in the number of people sends a positive signal. The formation of the monthly report system of the Central Commission for Discipline Inspection, the promulgation and implementation of the "Regulations of the Party and Government to save and oppose waste" can play a certain role. I believe that the subsequent published data will be further reduced. And officials can gradually enter the stage of rationally treating the bus problem."
Spare Parts For Spinning Machine
Spinning Machine Spare Parts,Spinneret Spin Packs,Spinneret Spare Parts,Spare Parts For Spinning Machine
spinneret hole of various hole shape for spinning machine line
The spinneret is one of the important parts of the spinning machine. Its function is to transform the viscous polymer melt or solution through the micropores into a trickle with a specific cross-section, which is solidified by a solidification medium or a solidification bath. And forming a thread. In the spinning process, the spinneret will be blocked by mechanical impurities, carbon fiber, gel, etc., the spinneret hole, when the spinneret hole is partially blocked, the spinning solution will overflow on the outer surface of the spinneret/plate, resulting in the original filament The size is uneven and there are problems such as fineness and hairiness. When the spinneret hole is completely blocked, it will greatly increase the rate of fiber breakage, which has a great impact on the fiber quality, so the spinneret must be cleaned regularly.
Many factories now use ultrasonic cleaning machines to clean the spinneret. Ultrasonic cleaning is a cleaning method that is widely used in the industry and has a good effect. Its working principle is that when the ultrasonic is propagated in the cleaning liquid, the tiny bubbles in the cleaning liquid are in the sound field. Vibration occurs under the action. When the sound pressure reaches a certain value, the bubble will increase rapidly, and then the shock wave can reach thousands of atmospheres when it closes and bursts. The shock wave reduces the adhesion between the stain and the cleaned workpiece and can destroy insoluble stains. And make them dispersed in the cleaning liquid, so as to achieve the purpose of cleaning. Although the bursting energy of the bubbles is very high, because the volume of each bubble is very small, there will be no mechanical damage and obvious temperature rise for the workpiece.
Spinning Machine Spare Parts,Spinneret Spin Packs,Spinneret Spare Parts,Spare Parts For Spinning Machine
Changzhou Jier Precision Machinery Manufacturing Co., Ltd. , https://www.jier-spinneret.com