After the transparent LED display is used for a long time, the product needs regular maintenance. LED transparent screen how to overhaul it? Need to see the specific circumstances to judge, the following share of relevant experience:
1, the transparent screen body black screen does not work
1) Confirm whether the control box is powered (PWR red light is on) and the signal output is normal (RUN green light flicker);
2) Maipu glorious LED transparent screen has been normal power, in the moment of power-on or power-off, the screen will experience a flashing once after the overall recovery of the black screen;
3) If the above two checks are correct, please confirm whether the network cable is well-connected. You can use the network cable tester to test whether the network cable is normal.
2, screen display is not comprehensive
1) Please confirm whether the content of the program is produced with the resolution of the transparent screen body.
2) Please confirm that the video processor resolution and screen resolution are the same.
3, a module, a plurality of light bars or the entire module does not work
First confirm the location of the fault phenomenon (use the visual inspection to confirm the location of the fault module and make a simple mark), and then replace the fault module accordingly. The specific method of replacing the module is as follows:
1 Cut off all the power of the screen body; open the cover plate behind the screen body and unplug the power line and signal line on the module;
2 Remove the left and right fixing screws of the module (shown in the right figure);
3 remove the fault module package;
4 Install the corresponding new module, fix the module screw and plug in the power cord and signal cable;
5 Is the power test screen normal?
The above is a solution to the common problem of how to repair transparent glass glass screens. From simple to complex and starting from the basics, it is sure to solve the problem.
Related Articles Recommended: â€: â€
†††é€æ˜Ž LED transparent screen in the end how much fire, see these manufacturers are doing ††â€
The future development trend of transparent LED display
Transparent LED display new market Blue Ocean where?
Why is it difficult to pick a big beam when LED transparent screens appear in 2017?
Transparent LED display applications create a new level of fashion
LED grille display five technical characteristics you know?
Buen Machinery,we are manufacturer of Plastic Machinery,mainly in Extrusion Blow Molding Machine, PET blow molding machine and Injection molding machine.
The company has complete equipment, powerful technical force , and strict management , so holds high production efficiency.
Control the hydraulic system with imported proportional valve, ensuring the action steady, accurate and energy saving.
High speed and efficient plasticizing system, mixing well and ensuring the production purity.
Keywords
Automatic Blow Molding Machine
Extrusion blow molding machine 2L
2L Automatic extrusion blow molding machine
Blow Molding Machine
Blow Molding Machine,Injection Blow Molding Machine,Drum Blow Molding Machine,Automatic Blow Molding Machine
BUEN MACHINERY CO.,LTD , http://www.buenmachine.com