Due to its large dynamic performance, large operating radius, various performances of various parts and complexity, and the specialization of objects for obstacle rescue, heavy duty wreckers make it natural to consume large amounts of fuel. How to protect road wreckers with high horsepower? The premise of power to reduce fuel consumption is a problem that many wrecker users are eager to understand. Here we talk about some ways to reduce the fuel consumption of heavy wreckers.
During the operation of the heavy wrecker, pay attention to the water temperature table, and the normal water temperature of the engine should be maintained between 80°C and 90°C. If it is too high or insufficient, the fuel consumption of heavy wreckers will increase. Special attention should be paid to the fact that if the wrecker tank water level is insufficient, the water temperature will quickly rise. If the water temperature exceeds 95°C, the wrecker's fuel consumption will increase by 30% to 40% compared with the normal temperature, and it will easily lead to clearing. The car's parts are worn and damaged. Regularly check the level of oil and lubricating oil on the road wrecker, and change the oil and lubricant according to the schedule. In addition, the correct maintenance of the wrecker engine, select the provisions of the brand of authentic oil, timely removal of wrecker car cylinder combustion chamber and the spark plug of the plot, found that the problem is ruled out at any time, even if it is a small fault, they will reduce the engine's power, waste of fuel . Regular replacement of air and oil filters will affect the fuel consumption of wreckers.
If you feel that the wrecker is not powered up, stop to see if there is a leak in the tire. If the tire pressure is too low, the fuel consumption will increase significantly. Keep the balance of the tires, check the tire's pattern from time to time to see if there is any uneven wear. At the same time to see if there is no sharp object embedded in the tire and cause a gradual leak. Always check the pressure of the wrecker tires to keep them in the best condition. Not enough gas or too much gas will increase fuel consumption. Therefore, tire pressure should be checked regularly. As long as there is one tire less 4kPa, this tire will reduce the life of 10,000km, and will increase the total fuel consumption of heavy wrecker.
Some of the above-mentioned heavy-duty wrecker fuel-saving techniques are based on years of experience gained by the Xiagong Chusheng Wrecker Factory. It is not denied that there are other ways to reduce fuel consumption, which is not explained here.
During the operation of the heavy wrecker, pay attention to the water temperature table, and the normal water temperature of the engine should be maintained between 80°C and 90°C. If it is too high or insufficient, the fuel consumption of heavy wreckers will increase. Special attention should be paid to the fact that if the wrecker tank water level is insufficient, the water temperature will quickly rise. If the water temperature exceeds 95°C, the wrecker's fuel consumption will increase by 30% to 40% compared with the normal temperature, and it will easily lead to clearing. The car's parts are worn and damaged. Regularly check the level of oil and lubricating oil on the road wrecker, and change the oil and lubricant according to the schedule. In addition, the correct maintenance of the wrecker engine, select the provisions of the brand of authentic oil, timely removal of wrecker car cylinder combustion chamber and the spark plug of the plot, found that the problem is ruled out at any time, even if it is a small fault, they will reduce the engine's power, waste of fuel . Regular replacement of air and oil filters will affect the fuel consumption of wreckers.
If you feel that the wrecker is not powered up, stop to see if there is a leak in the tire. If the tire pressure is too low, the fuel consumption will increase significantly. Keep the balance of the tires, check the tire's pattern from time to time to see if there is any uneven wear. At the same time to see if there is no sharp object embedded in the tire and cause a gradual leak. Always check the pressure of the wrecker tires to keep them in the best condition. Not enough gas or too much gas will increase fuel consumption. Therefore, tire pressure should be checked regularly. As long as there is one tire less 4kPa, this tire will reduce the life of 10,000km, and will increase the total fuel consumption of heavy wrecker.
Some of the above-mentioned heavy-duty wrecker fuel-saving techniques are based on years of experience gained by the Xiagong Chusheng Wrecker Factory. It is not denied that there are other ways to reduce fuel consumption, which is not explained here.
Stop Valves are closed by screwing a rubber gasket down onto a seat in the middle of the valve. Pros only use small versions that act as shutoff valves for fixtures such as sinks and toilets and outdoor sillcocks. Flow is inefficient because of the circuitous route the fluid (water, in most cases) has to follow. It's important to orient the valve in the right direction with the arrow (cast into the side of the valve) aligned with flow direction. That way, water flows against the bottom of the rubber gasket. If the valve is put in backward, the flow will force the gasket away from the top of the valve.
Stop Valves, Shower Stop Valve, Water Stop Valves, Brass Stop Valve
ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalve.com