The rear-end crash is a relatively common traffic accident, and it is also the most common mistake for novice drivers. So, how can we prevent rear-end collisions when novice drivers drive on the road? Impatient, the skills will be delivered soon, look patiently
One, follow the car attention to the distance
Some drivers are particularly close to the car, and the front of the car has no affixed renminbi. Why is it so dangerous that it is so close? Especially on high speed. High-speed following the car to set the distance from the car, remember the "three-second rule", such as 120km / h when the speed is basically to maintain a distance of about 100 meters. Urban driving does not apply this principle. If it is too far away, it will be frequently jammed by the side car. At this time, it is necessary to determine the distance of the following car according to the road conditions.
Second, uphill section pay attention to the distance
If you go uphill or on an overpass, etc., if you stop when the speed is slow, you should pay attention to the distance from the front car. In addition, we must pay special attention to the fact that we must not be behind a full-size cart. We may drop something from the car at any time. Even if we drop a small stone while driving, it may be fatal and not fatal. Will damage your car.
Third, high-speed traffic jam ahead of schedule
When there is a traffic jam at high speed, if you are in front of a big car, you need to park in advance. It's best to stop at a distance, and if someone plugs it forward, he can let him add it. To see more accidents in the rear-end cart of a car, it is generally the case that the car is jammed into the bottom of the cart, and the risk factor does not say that you also know.
Fourth, novice drivers do not follow six kinds of cars
1, carts, carts do not block the line of sight does not say, you may also suddenly drop goods on the way, bruises and bumps are not good, it is even more terrible rear-end.
2, buses, cities do not drive with the bus, will also block the front line of sight, easy to red light; as well as public transit lanes like the station, with the car more trouble.
3, taxis, some people waved or passengers get off, taxi master may stop at any time to stop, if the master no more point headlights, after the car is more rampant.
4, foreign cars, drivers are often unfamiliar with the local terrain, driving slow and easy to park or suddenly change lanes, or far from good.
5, the practice car, novice driver technology is not skilled, driving speed is uncertain and easy emergency brake, followed by from time to time to press a horn press, will make him more nervous, a nervous do not know what will happen.
6, modified cars, general household cars do not have good performance of the modified car, if the front of the car suddenly brake, the rear car may be due to the reaction is not timely and rear-end, so it is far from it.
Cooling capacity:130kW-2500kW.
Characteristics:
1.Reusable. Using solar energy stored in earth as cooling & heating source.
2.Great environmental and economic benefit, No boiler or cooling tower; less space, less CO2 and less initial investment.
3.Acting as multi-function unit. Such as cooling, heating, sanitary hot water separately or simultaneously.
4.Wide application as hotel, apartment, villa, factory, shopping center, office building, school, etc.
5.Semi-hermetic screw compressor for mod.130 to 2500. Each compressor is equipped with a crankcase heater and a thermal overload cut-out; the screw compressor is also complete with a built-in electronic protection with temperature sensor located directly in the motor winding and on the discharge line.
6.The refrigerant circuit is complete with sight glass, filter drier, high and low pressure gauges, solenoid valve, direct expansion valve, high and low pressure switch.
7.Shell and tube dry expansion type condenser, factory insulated with flexible close cell material. Shell and tube type evaporator, factory insulated with flexible close cell material.
8.The electric panel consists of compressor breaker, compressor contactor, phase sequence relay, control circuit breaker, microprocessor control with function display.
9.LCD display, touch screen control panel as standard. Automatic operation dramatically reducing maintenance cost thanks to reliable microprocessor system.
10.For the units with semi-hermetic screw compressor, an infinitely variable capacity control system that is capable of exactly matching the demand requirement of the system is to be supplied. This system is to provide precise and stable control of supply water temperature over the complete range of operating conditions.
11.OPTIONAL
♦ Electronic expansion valve.
♦ Desuperheater as optional.
♦ Electronic controller with BMS system.
♦ Low noise compressor cabinet or outside full cover
♦ Channel Steel base.
Geothermal Heat Pump
Geothermal Heat Pump,Geothermal Heat Pump Air Conditioner,Heating Geothermal Heat Pump,Custom Geothermal Heat Pump
Jinan Amrta Air Conditioning Co.,Ltd , https://www.amrtaac.com