First, the selection is decisive: 1, in order to achieve the specific purpose of use, select the correct, applicable pump at any time is very important. The only way to ensure the best operation of the device to meet customer requirements and minimize costs, as well as the standard pump. Depending on the production capacity and the costs, the pumps can be divided into pumps for standard operation and pumps for special applications. If a manufacturer wants to provide both a standard application pump and a high performance pump for the health sector, all of his pumps must meet the quality and structural design standards in this area. 2, in general, the standard performance of the pump performance specifications are as follows: 1), the inlet pressure to reach 4bar, 2), the temperature up to 120 ℃, 3), viscosity range up to about 150cP. 4) AlfaLaval offers standard and specialty centrifugal pumps for industries with high hygiene requirements in the pharmaceutical and food industries. SolidC pump is a newly developed pump for standard applications. In the design of the SolidC pump, the following points have been noticed in particular: In addition to the modular construction, many components of all sizes are used; delivery times are shortened as standard; flexibility (for easy installation and storage) And a good overall price. Second, product protection is crucial 1), users in the health field attach great importance to product protection when transporting products, and generally require that all equipment components have good cleaning ability. 2) SolidC fulfills these requirements with the help of advanced structural design and calculation software, SolidC: Due to the small tolerances of the internal structural parts and the special structure of the impeller it is possible to guarantee good flow properties while at the same time protecting conveyed products and increasing equipment capacity and efficiency . In spite of this, enough clearance is left to ensure effective cleaning with the CIP method. Third, to achieve simple and rapid maintenance Industrial processes continue to improve, and parking times need to be shorter and shorter. Therefore, when selecting a standard pump, pay special attention to whether it can be easily and quickly repaired in order to replace the shaft seal and O-ring in a particularly short period of time (within 10 minutes here). In this way, pump users can significantly reduce pump maintenance costs. Fourth, for all pumps, the shaft seal is a key point. To minimize downtime, the standard pump uses a particularly advanced seal: an external (shaft end) unloaded (decompression) shaft seal that can be used in difficult-to-operate series pumps. Five, SolidC-type pump is a newly developed pump for standard applications. The pump complies with German national hygiene standards and also meets the 3A and EHEDG standards. This standard pump uses an exceptionally advanced seal: an external (shaft end) unloaded (decompression) shaft seal that can be used in difficult-to-operate specialty series pumps to allow all structural series pumps to use only one shaft seal, Maintenance is simple. Six, for the user, to understand what kind of pump you need, is used for normal operation or high performance special applications, but also pay special attention to the choice. More Search Keywords: Pumps