Smart Atmosphere Comprehensive Sampler

Smart Atmosphere Comprehensive Sampler Model: TC-2030-II

Executive standard:

HJ/T 374-2007 Technical Requirements and Test Methods for Total Suspended Particulate Sampler

HJ/T 375-2007 Environmental Air Sampler Technical Requirements and Test Methods

JJG 946-1998 Total Suspended Particulate Sampler JJG 956-2000 "Atmospheric Sampler Verification Procedure"

Application scope:

Collecting ambient atmosphere TSP\PM10 (optional PM5\PM2.5)

Environmental impact assessment, air quality monitoring, indoor monitoring of toxic and hazardous gas collection

Features:

Compact structure, small size, light weight, Chinese menu display, good man-machine interface

Real-time clock, timing sampling, instant sampling, multiple sampling intervals, etc.

Power failure during sampling, automatic sampling of incoming calls, brushless motor, average time between failures greater than 2000 hours

Sampling flow automatic control, automatic calculation of sampling volume, low temperature automatic turn on heating device

Fault automatic protection, automatic data memory, parameter software calibration function

Smart Atmosphere Comprehensive Sampler

Technical Parameters:


Range of parameters

Resolution

error

Air sampling flow

0.1 to 1.0 L/min

0.1 L/min

≤±5%

Dust sampling flow

60--120.0 L/min

0.1 L/min

≤±2.5 %

Dust flow stability

<±2% (voltage varies from 180V to 250V, resistance varies within 3 Kpa)

Delay time

00:00:00-99:59:59

1sec

≤±0.2 %

sampling time

00:00:01-99:59:59

1sec

≤±0.2 %

Intervals

00:00:01-99:59:59

1sec

≤±0.2 %

Sample times

1 to 99

Dust temperature measurement

-20.0 to 80.0 °C

0.1 °C

≤±2.5 %

Dust pressure measurement

0-20.00 Kpa

0.01 Kpa

≤±2.5 %

Atmospheric pressure measurement

70.00 to 130.00 Kpa

0.01 Kpa

≤±2.5 %

Dust maximum sampling volume

999999.9 L

0.1 L

≤±2.5 %

Sampling data preservation

200 groups

Dimensions

240×205×280 mm

Working power

AC220V±10 %, 50Hz,

Power consumption

≤200 W

Photovoltaic Pile Driver

 

There are many types of photovoltaic power piling machines, and the working principle of each type is different. Photovoltaic power piling machine can basically be divided into hydraulic piling machine, drop hammer piling machine, steam hammer piling machine, diesel hammer piling machine, in which steam hammer photovoltaic piling machine often needs supporting the use of screw air compressor.

 

The machine is suitable for piling works such as building foundation construction, high-speed road foundation reinforcement, high-speed railway power facilities, wind power plants, solar photovoltaic power plants, soft soil treatment and reinforcement.

 

Hydraulic PV power Pile Driver is a multi-purpose highway guardrail steel pipe pile Construction Machinery. With hydraulic pressure as the driving force, the hydraulic pressure can be adjusted according to different soil conditions in the stratum to achieve appropriate impact force for driving. It is a new type of pile driver. According to different configurations, steel pipe piles can be driven in, pulled out, or drilled on the subgrade and stabilization layer before being piled.

 

Drop Hammer Photovoltaic Power Pile Driver is a kind of pile tube sinking equipment. It has the advantages of simple design, easy installation and transportation, high impact force, stable performance and so on. It is a steel weight, which is lifted by the hoisting machine, and it is lifted off the trailing guide frame. Freefall and piling. All use electric power, without having to buy expensive diesel power.

 

The main body of the diesel hammer pile driver is also composed of a cylinder and a plunger. The cylinder type diesel hammer uses the cylinder as a hammer seat and directly guides the inner wall of the extended cylinder barrel, eliminating two guide rods. The plunger is a hammer head, which can be The cylinder moves up and down. Its working principle is similar to that of a single-cylinder two-stroke diesel engine. The diesel hammer has a fuel injection pump, a fuel tank, a cooling water tank, and a pile cap attached to the hammer seat. The gap between the plunger and the cylinder is sealed with a resilient plunger ring.

 

Specification

Drill depth :0-9m

Drill diameter :50-900mm

Geological requirements:soil or soft rock

Photovoltaic pile driver

Photovoltaic Pile Driver

Photovoltaic Pile Driver,Hydraulic Photovoltaic Pile Driver,Photovoltaic Solar Pile Driver,Photovoltaic Pile Driver With Crawler

SHANDONG HENGWANG GROUP , http://www.hwmac.com

Posted on