Three arrows were made and the momentum was positive. On March 7th, 2015, Xuzhou, Linyi, and Fuyang were spotted. The flame red and coffee golden J6 trucks matching the new version of Xvear's 11-litre aowei were neatly lined up and accepted by the guests.
As is known to all, the J6 heavy-duty truck of the FAW Jiefang J6 truck is a landmark product of China’s truck industry and represents the highest level of technology in China’s commercial vehicle sector. However, with the Liberation J6’s listing for more than 9 years, the Xikai Aowei engine has a strong market retention rate. Renowned as a famous machine, its sales volume has increased at an average annual rate of 60%, and the total sales volume has already exceeded 600,000 units. The concept of “buying a car to buy a liberation car and selecting an aeronautical machine†has been deeply rooted in the minds of users. The FAW Liberation J6 pilot version matching the new version of the Xichai Aowei 11L 460-hp four-nation machine achieved the maintenance cycle, dynamics, and festivals by optimizing powertrain assembly and adopting reliable imported components for key components of the chassis. Oil, reliability, safety, comfort and other six aspects of navigation, become a high-speed, high-efficiency and reliable model for domestic trunk logistics users.
Liberation J6 pilot version truck equipped with Xichai Aowei engine
It can be said that the new version of Xichai Aowei 11L 460 hp four machine, adhering to the advantages of Aowei 11L diesel engine safety, fuel-efficient, reliable, power of 460 hp, the maximum torque increased by 10% over the original product. By optimizing the system of combustion, lubrication, and oil supply, the engine maintenance cycle can be up to 100,000 kilometers and the replacement of lubricants; the Aowei 11L machine can match the 3.7 speed ratio, and the starting acceleration capability is strong. When the vehicle is running at high speed, it can ensure that the engine is Lower speed area, better fuel economy; Aowei 11L engine fuel economy effect is obvious, its engine power up to 30.7, 100 km fuel consumption lower than competing products 2-3L, standard shroud, 800L aluminum alloy fuel tank, in On the basis of the fuel-efficient system, the J6 pilot version has further expanded its advantage of low fuel consumption. What makes the user happy is that the new version of Xichai Aowei 11L 460-horsepower is more reliable. The engine brake is standard, the maximum braking power is 340 horsepower, and there is no need to “pour water†on the next long slope, and the driving speed is reduced. The frequency of use of brakes is excellent for active safety.
The three cities were completely boiling for the release of the J6 Pioneer Edition. At the launching ceremonies in Linyi, Xuzhou, Fuyang, etc., the buying was very popular. There were card friends who even came with cash to set the car. Linyi realized the on-the-spot booking of 360 cars, and Xuzhou realized on-site booking of 342 cars. 625 sets of vehicles, an average of 9.9 seconds / Taiwan, creating a mythical level of sales speed!
Slab gate valves are usually used for the oil & gas pipe-lines.
Slab Gate Valve are manufactured with a full bore, slab gate, rising stem OS&Y and floating seats. Slab gate is a simple solid gate design, featuring metal-to-metal seal between gate and seats, to apply for the most severe service condition, including corrosive and abrasive fluid environments. A floating seat is designed to match the slab gate. A belleville spring and O-ring between each seat and body ensure a tight seal against the slab gate. The floating slab gate uses the natural force of line pressure to obtain a dynamically tight downstream seal in high-pressure differential applications. Low-pressure sealing is accomplished with an o-ring that energizes the seat and minimizes corrosion and debris build up. Common trims are available.
Double block and bleed capability and automatic relief of excess body pressure are standard feature of this seat design.
The smooth, continuous bore minimizes turbulence within the valve and when in the open position it produces a pressure drop equivalent to a portion of pipe of same length and diameter. The seat faces are outside the flow stream and therefore protected from the erosive action of the flow. Pigs and scrapers can be run through the valve without damage.
Through Conduit Slab Gate Valve design minimizes and eases the maintenance allowing for the service operations to be done without the removal of the valve from the line.
Slab Gate Valve
Slab Gate Valve, Through Conduit Gate Valve, Cast Steel Gate Valve Supplier, Flat Gate Valve, Flanged Gate Valve Manufacturer
Wenzhou Kolink Valve Co., Ltd. , http://www.kolinkvalves.com