As a big agricultural country in China, the production and preservation of crops is of crucial importance to our country. The drying of cereals plays a very important role in it. It is an important step in agricultural production, it is also a key link in agricultural production, and it is an important part of the entire mechanization of food production. The grain drying mechanization technology is based on machinery as the main means, using the corresponding process and technical measures, artificially controlling the temperature, humidity and other factors, without reducing the quality of the grain under the premise of reducing the moisture content in the grain to meet the national safe storage standards Drying technology. Driven by the national food security strategy and agricultural subsidy policy, the grain dryer market in China is gradually heating up. However, the dryer market in China is still in a non-standard development stage, and the market is unbalanced.
Grain dryer market ready
The post-production loss of food is alarming
China is the world’s largest food producer and consumer, with an annual total grain output of approximately 500 million tons. According to statistics, the loss of grain during grain threshing, drying, storage, transportation, processing, and consumption after grain harvesting in China is as high as 18%, far exceeding the 5% FAO standard.
In these losses, due to climatic reasons, cereals can no longer reach the goal of drying or failing to reach a safe moisture content of 5% for foods that cause mildew, germination and other losses. If the annual output is 500 million tons of food, it is equivalent to 25 million tons of food. Each person eats 500g of food per day, which can eat 68,000 people for 1 year. This figure is staggering and reduces the grain loss received by the hand to the lowest point. In this sense, the mechanization of grain drying is more important than the mechanization of field operations. It is an important guarantee for the high yield and harvest of grain.
It is understood that the harvested corn and rice have a moisture content of more than 30%, and mildew easily occurs after exposure to moisture. Therefore, it must be dried before storage to reduce the moisture content below safe moisture. In addition, in the southern food market, the moisture content determines the level of rice prices, reducing the moisture is to increase the economic efficiency of food operations.
Drying machinery into the market new favorite
In recent years, China's grain dryer industry has delivered a stunning report card: From 2008 to 2010, the domestic dryer holdings increased rapidly at an average annual growth rate of around 50%. According to incomplete statistics, There are more than 500 domestic drying equipment manufacturers with annual sales of more than 3 billion yuan.
Despite the rapid increase in domestic dry machinery holdings, mechanically dried grains account for only about 1% of the country's total grain output each year, while mechanical grain drying in developed countries in the world can reach about 90% of total production. The development of machinery can not be adapted to the needs of grain production development. With the development of the deep processing of agricultural products, the increase of farmers' income, and the acceleration of the process of agricultural modernization, grain drying technology equipment will have a broad market prospect and huge potential for development.
It is estimated that if the mechanical drying ratio reaches 30%, at least 8,000 to 10,000 sets of drying equipment are needed. In recent years, there has been a change in the relationship between the grain purchase and sale system and supply and demand. In addition to the promotion of mechanized harvesting operations, the number of high-moisture grain is increasing, and some traditional non-high-moisture food production areas have also become high-moisture grain production areas. The grain moisture harvest in the high-moisture grain-producing areas has also increased, further expanding the demand for grain drying equipment.
Dryer Market Opportunities and Challenges
At present, China's drying equipment market is facing a good opportunity for development, mainly in:
First, the policy environment is positive. The state attaches great importance to the production and promotion of grain drying equipment. Not long ago, the “Opinions on Vigorously Promoting the Socialization of Agricultural Machinery Service†issued by the Ministry of Agriculture specifically proposed to encourage some agricultural cooperatives that have strength to transfer land for contracting, including grain drying, "One-stop" agricultural machinery service projects including agricultural product processing. The documents issued by the government agencies of the southern provinces on speeding up grain drying will increase the scale of drying equipment in the next three years to form a large-area drying effect, for example, to enable grain growers of more than 20 mu to achieve grain drying mechanization. The goal. In Shaoxing, Zhejiang, in 2012, based on the original 60% purchase subsidies for grain dryers, the subsidy standard was increased to 80% to 90% of the purchase amount. The drying equipment market faces a good policy environment with good economic support, price subsidies, and tax incentives.
The second is that there are many kinds of drying machinery on the market, and there are practical new types of machinery and technical service support that can be selected for promotion.
The third is the rapid promotion of the combine harvester and the mode of cross-regional operation, so that a large number of grains need to be dried quickly and quickly. The future of grain drying machinery is huge.
Furniture refers to movable objects intended to support various human activities such as seating (e.g., chairs, stools, and sofas), eating (tables), and sleeping (e.g., beds). Furniture is also used to hold objects at a convenient height for work (as horizontal surfaces above the ground, such as tables and desks), or to store things (e.g., cupboards and shelves). Furniture can be a product of design and is considered a form of decorative art. In addition to furniture's functional role, it can serve a symbolic or religious purpose. It can be made from many materials, including metal, plastic, and wood.
Metal furniture is a type of furniture that uses metal parts in its construction. There are various types of metal that can be used, such as iron, aluminium, and stainless steel.
Aluminum is a light and corrosion resistant metal,and to take advantage of these qualities, it is heavily utilized for stamped and cast furniture, especially in the category of molded chairs. Aluminum atoms form an outer layer of Aluminum Oxide, which prevents the internal aluminum from being corroded.
Metal furniture is a popular choice of furnishings, especially used outdoors for decks and patios. However, metal furniture can also be used indoors, such as brass beds, brass tables, iron bakers racks and metal curio cabinets. Besides being sturdy, metal furniture is attractive, giving a contemporary look to your home.Xinyu Mould manufacturing all types of aluminum casting furniture product HPDC dies and components.
Xinyu Mould Capabilities
-
Xinyu Mould At Glance
1.Year Of Establishment:2002
2.Location:2 (One Is Brand New)
3.Land Area:3600sqm
4.Emplyees:120
5. Equipment;CNC:18 (Makino, Toshiba, Liyang ), WEDM:10, EDM:9, Spotting Machine:2, CMM:2, Gun Drill Machine:2, Die Casting Machine:7, Others:50
-
Xinyu Mould Technical Profile
1. Engineers In 2d&3d: 16
2. Engineers In Cnc Programming:6
3.File Format For 2d: Dwg&Dxf
4.File Format For 3d:Iges&Step
5.Software For 2d:CAD
6.Software For 3d:Simens NX & Pro-E
7.Software For Programming: Powermill
8.Software For Mould Flow: Magma
-
Xinyu Mould Process Control
1.MES Process Control System
2.IATF 16949 Quality System
3.Well-Trained Operators
4.CMM Inspection
-
Xinyu Mould Advantages
1. CAE Support Magma(Lid 18175001)
2.Rich Experience In Casting Dies For Auto Structual Parts,Powertrain;Oil Pan;Redirector; AC Compressor
3.Trial Run Machines Available In House From 160t To 1600t
4.Vaccum Venting System Application In Dies
5. Partial Squeeze Skill In Dies
6.High Precision Imported CNC(5 Axis)
7.Globalized Hr Concept
-
Xinyu Mould Die Capacity
1.Max Die Size:2500*2500*1800
2.Max Die Tonnage:2500t
3.Biggest Die Casting Machine:1600t
4.Most Complex Die: 11slides
5.Yearly Capacity:350sets
-
Xinyu Mould Marketing
1.Main Market:Na;Europe;Asia
2.Main Field: Auto;Telecommunication;
Lighting;General Machinery;Power Tool
Furniture
3.Partner Offering After Sales Service:
Available In India&Us,Europe
4.Business Involved:
Aluminum Die Casting Dies
Aluminum Die Casting Components
-
Xinyu Mould Commercial Terms&Conditions
1. Fob Ningbo/Shanghai
2.Payment Term:Tt
3.For Dies:50% Down Payment 50% Prior To Delivery
4. For Castings: 10% Down Payment
The Rest Within 30days After b/l Date
5.Leadtime For Quotation:2days
6.Feedback For Customers' Query:24hours
Aluminium Castings For Furniture and other parts
Aluminium Castings For Furniture,Furniture Aluminium Castings, Aluminum Die Casting For Furniture,Custom Furniture Aluminium Castings
Ningbo Beilun XinYu Mould Manufacturing Co.Ltd. , http://www.xinyudiecasting.com