On March 19, 2015, Yuchai Petroleum Lubricant Company held the opening ceremony of Yuchai Petroleum Lubricant R&D Center. In the spring breeze, Mr. Amir, CEO of PetroChina Lubricants, and Yu Ping, Chairman of Yuchai Group's Board of Directors, jointly pulled red silk on the plaque of Yuchai Petroleum Lubricant R&D Center. From then on, this site was Yuchai Oil Petroleum Lubricant R&D Center of Nanning Base of Yuchai Engineering Research Institute was officially established and put into use.
Yuchaimar Petroleum Lubricant Company put into use
According to reports, Yuchaimar Petroleum Lubricant R&D Center is built in accordance with domestic leading and international standards. It integrates Yuchai’s advanced engine bench test technology and Mahu Petroleum's powerful lubrication research technology, making Yuchai Engine rich in resources and With a deep integration of the company's petroleum, it has two platforms for product development and technical services. In terms of product research and development, it has six functions, including basic research, formulation technology, physical and chemical testing, bench testing, vehicle testing, and product certification. For technical services, the R&D center will strengthen the technical marketing force and provide customers with more powerful technical services through customer training, experience marketing, technical support, and after-sales service. Yuchaima Petroleum Lubricant R&D Center will provide Yuchaimar oil-lubricated and stretched product chain, expanded product belts, and product upgrades and optimization to provide powerful equipment and technical support to lay the foundation for improving the competitiveness of Yuchai Petroleum oil products.
The R&D center is constructed in three phases, with a building area of ​​1,000 square meters. The first floor is the company's and product showroom, and the second floor is the experimental area. It shares Yuchai's engine R&D platform resources. The experimental area includes physical and chemical laboratories, disassembler scoring room, viscous temperature laboratory, friction laboratory, old oil analysis room, ICP room and cold/hot constant temperature room 7 functional laboratories, about 30 sets of experimental equipment, can carry out About 40 physical and chemical tests and simulation tests. The R&D center will introduce advanced imported equipment, adopt the ASTM international test standard to carry out experiments, adopt advanced R&D project management mechanisms to carry out various R&D work, and build a safe and environmentally friendly test environment in accordance with the internationalized safety standards.
Junping said that PetroChina Lubricating Oil Company has a reputation in resources, technology, management and branding in the world. Since the two parties established a joint venture company, they have stood for the best interests of shareholders and have been striving to open up markets and achieved outstanding performance. . The shareholders of the two parties actively promote cooperation. The establishment of the R&D center is one of the consensuses reached by both parties. This move will promote Yuchaimar Petroleum Lubricant Co., Ltd. to achieve significant development. It is hoped that the R&D center will provide Yuchai Engine with more and better lubricants. It is hoped that Yuchai Petroleum Lubricants will further expand its product chain and explore more and larger markets.
Mr. Amir said that technology is the foundation for the development of the company. Since the establishment of Yuchai Petroleum Oil Lubricant Co., Ltd., Yuchai has successfully gathered the advantages of Yuchai and Mayou Lubricants, and has achieved very good business results. The establishment of an R&D center today will allow the two parties to further advance their cooperation. The R&D center is the core technology and will conduct research in technology promotion, product development, cost control, etc. to provide Yuchai with more technical support to provide more effective lubrication performance for Yuchai Engine and better for Yuchai Engine users. Product services, so that both parties can more effectively occupy the market.
Mr. Eric Holthusen, Global Operations Director (Technology/Marketing) of PetroChina Lubricants, Mr. Giuseppe Pedretti, General Manager of PetroChina Lubricating Oil Asia Pacific, Mr. Barry Smith, Chief Development Officer of PetroChina Lubricants, Andy Holmes, Global Technical Director of Lubricants Oils, PetroChina Mr. Ravi Tallamraju, Technical Director, Asia Pacific, Mr. Ma, Lubricant Asia Pacific; Zhou Sunhai, Vice President, Yuchai Group; Guan Min, Vice President, Yuchai Group; Wang Yuanqian, Investment Director, Yuchai Group; Yuchai, Chairman of Yuchai Petroleum Lubricants, Xie Yuqiang, Yuchai Petroleum Lu Qibang, general manager of lubricants, attended the opening ceremony.
Die casting(Aluminium Die Casting) is a metal casting process that is characterized by forcing molten metal under high pressure into a mold cavity. The mold cavity is created using two hardened tool steel dies which have been machined into shape and work similarly to an injection mold during the process. Most die castings are made from non-ferrous metals, specifically zinc, copper, aluminium, magnesium, lead, pewter and tin based alloys. Depending on the type of metal being cast, a hot- or cold-chamber machine is used.
The casting equipment and the metal dies represent large capital costs and this tends to limit the process to high volume production. Manufacture of parts using die casting is relatively simple, involving only four main steps, which keeps the incremental cost per item low. It is especially suited for a large quantity of small to medium-sized castings, which is why die casting produces more castings than any other casting process.[1] Die castings are characterized by a very good surface finish (by casting standards) and dimensional consistency.
Two variants are pore-free die casting, which is used to eliminate gas porosity defects; and direct injection die casting, which is used with zinc castings to reduce scrap and increase yield.
Aluminum Die Casting, Die Casting Components, Pneumatic Zinc Die Casting, Zin Die Casting,Aluminium Die Casting
NINGBO BRANDO HARDWARE CO.,LTD , http://www.brandopneumatic.com