Method for treating wastewater in lead-zinc ore dressing plant

The main sources of lead zinc ore dressing plant include dressing wastewater, tailings sediment. The dust generated by the crushing and screening workshop and the noise generated by large equipment such as crushing and grinding. For lead-zinc ore dressing plants, the pollution control of crushing and screening dust is usually good. In the design of the concentrator, a technical solution to solve the problem of excessive dust control was formulated. In the material crushing, the screening equipment can be equipped with a dust cover, and the dust discharge point is set at the blanking point of the mining equipment, and the dust is used by the air duct. The material is sucked to the dust collector for removal. There are not many ways to deal with broken and grinding noise. Only a single concentrator uses a rubber lining in the mill to reduce noise to a certain extent. Wastewater from lead-zinc mines is a major source of pollution, including wastewater from mining sites and wastewater from concentrators. The concentrator wastewater includes: tailing water, concentrate overflow water, accident water, plant washing water, and tailings reservoir permeate water.

There are different classification methods for wastewater treatment, but in principle, it can be divided into three categories: physical treatment, chemical treatment and biological treatment. Each category can be divided into several separation methods. The ore dressing wastewater treatment should be based on the water quality, water quantity and production process characteristics, and consider appropriate treatment technologies from the perspective of energy conservation and comprehensive recovery.

A neutralization method

The neutralization method uses an appropriate neutralizing agent and adjusts the pH to achieve an emission standard or a reuse index for the acidic or alkaline wastewater. And the pH was adjusted to an appropriate range, but also dissolved iron, aluminum, copper, zinc, manganese, cadmium and other metal ions in waste water, a hydroxide precipitate formed was removed. The neutralizing agent commonly used for acidic wastewater is slaked lime and limestone , which are cheap and have a rapid settling speed.

B oxidation method

The oxidation method is a treatment method that decomposes pollutants in water by an oxidation reaction to make them harmless. Commonly used oxidizing agents include active chlorine-based liquid chlorine, sodium hypochlorite, bleaching powder, and hydrogen peroxide, sodium persulfate, and ozone. The ore-containing wastewater containing cyanide wastewater and flotation reagents containing xanthate and sodium sulfide is commonly used in this method. In addition, the aeration method also utilizes oxidation, which obtains sufficient oxygen from the air to oxidize inorganic substances and organic substances in the water, and becomes harmful to be harmless.

In addition to the above two methods, the following measures are commonly used. (l) Increasing the tailings storage volume and increasing the inventory time can not only degrade chemical oxygen-consuming substances, but also reduce the amount of contaminated particles discharged from tailings water. (2) Improve the beneficiation process system and adopt a cyanide-free process to replace highly toxic or toxic agents with low-toxic or non-toxic agents. (3) Improve the return water utilization rate of the concentrator and reduce emissions.

Alligator Shear

What is the role of an Alligator Shear Machine in metal recycling?

The Alligator Shearing Machine which is commonly used in metal fabrication and scrap metal recycling to cut a range of metal items including pipes, bars, and even profile steel such as I-beams.
Each machine can be controlled manually or automatically.
The Alligator Shear Machine is easy to operate, safe and reliable, and can adapt to a variety of different environments.



How to choose a suitable Alligator Shear Machine?
Q43 series alligator shear is the ideal machine for shearing reinforcing bar, mild steel round bar, aluminium, copper, steel tubing, lead, cable and most other hard metals.
With the hold-down clamp device, to prevent material from kicking back and guarantee maximum operator safety, and do the shearing jobs most efficiently and safely.
We provide a variety of models of alligator shear, with various blades sizes for options, which support different working environments.

Q43-Alligator Shear (Integral structure design)

Q43-Alligator Shear (Split structure design)

YMSRECYCLING's wide range of Hydraulic Alligator Shear is designed for scrap yards and various industrial cutting applications.
These types of equipment can be customized and extended according to the actual needs of customers on-site.
YMSRECYCLING also offer economical and effective solutions to help you to process different scrap metal.
Please provide your requirements in consultation.

CONTACT YMSRECYCLING
Call us now on +86-15950122559

To start maximising your returns from your aluminum metal recycling.
Please email sales@ymsrecycling.com or visit our website directly for further information about the products you are interested in.

Scrap Metal Shearing Machine,Alligator Shear,Metal Cutting Machine,Hydraulic Alligator Shear,Alligator Shearing Machine

Jiangyin Yimaisheng Hydraulic Machinery Co., Ltd. , https://www.ymsrecycling.com