In general, small truck blasting material is in the process of traveling on the highway, often prone to overheating of the tire occurs. As a special type of transport vehicle, the blasting equipment transporter can not be underestimated if the tire is in a state of overheating. Therefore, if a tire overheating and other similar conditions occur, it must be promptly taken. The treatment measures in order to effectively protect the safety of the transporter. Here are some details about how to deal with the problem of tyre overheating caused by the blasting equipment carrier during driving.
First of all, the small blasting equipment transporter must carry out detailed inspection before getting on the road. It is often closely related to tire overheating and tire inflation. At the same time, attention must be paid to the placement of items carried on the transporter. In the case of overweight or overweight, it is likely to cause tires to frictionally produce heat and fire, which is very dangerous for explosive equipment transporters.
Secondly, when driving on the highway, when the tires of the transport vehicle are hot, remember how to use the cold water to cool down. Spilling cold water directly on the overheated tires will easily lead to changes in the internal structure of the tires, which will cause deformation of the curtain inside the tires. Severely, there may also be cases of cord stripping. Therefore, when the temperature of the tire is relatively high, it is better to choose to stop in a cool place or a professional service area, so that the pressure and temperature inside the tire can be naturally released and decreased. This can also effectively avoid the occurrence of a flat tire. .
Therefore, when the tire temperature and tire pressure are relatively high when driving on the highway, do not blindly give up or splash cold water, both of which are more dangerous. The above is the specific treatment method to be shared with the riders today about the tire overheating during the operation of the small blasting equipment transport vehicle. Are the riders all mastered?
Household and Commercial Kitchens Stamping Mould here refers to the business of Kitchen and commercial Stainless steel dishwasher sink, Stainless steel 304 commercial churning bucket product, Stainless Steel 304 food grade Wash Basin Product, and Stainless steel butter tray and bar tray and so on. All these stainless steel products can be made by a compound die which is consist of a deep drawing die, shearing die, blanding die, cutting die etc.
Household and Commercial Kitchens Stamping Mould
Stainless Steel Commercial Sink,Household Air Conditioner Plastic Mould,Commercial Air Conditioner Plastic Mould,Household Refrigerator Plastic Injection Mould
Zhejiang Ceeto Molding Technology Co.,Ltd. , https://www.ceetomold.com